Do you have a question about the LW800 GOLF PRO and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Berger+Schröter LW800 GOLF PRO
Page 1
Range Finder LW800 GOLF PRO User Manual LW800 PRO range finder integrates the advanced technology of Emission Projection Display (EPD), to replace traditional Transmission Display LCD screen, which upgrades products performance in below two points: 1)Emission Projection Display Screen solves the problem of unable to recognize reading from rangefinder in dark circumstance.
Page 2
Attention: This product is high precision optic products, things listed below but not limited to will cause unrecoverable problems to products, which will not be covered by warranty. For example: 1. Expose products outside with surrounding temperature above 50 Celsius degree or below -10 Celsius degree 2.
Page 3
With eyeglasses (graphic 2) I.3 Internal LCD display screen Press power key The default mode is “ranging” for first time to start rangefinder I.4 Diopter adjustment After setting of eyepiece cover, start the rangefinder. View through the rangefinder eyepiece to check scenery, turn the eyepiece cover left and right to make the scenery as clear as the character on the display screen.
Page 4
When battery power is too low, the low battery icon will appear all the time to remind user to change battery. II. Ranging Operation II.1 Mode choosing key to choose between “Ranging”, “Fog” “Pinlock”, “Golf distance Short press correction”, “Horizontal distance measure” and “Vertical height” circularly. Ranging mode Pin lock mode Golf distance correction...
Page 5
Horizontal distance measure Vertical height measure II.2 “ranging” mode II.2.1 Single ranging mode Short press power key to start ranging, the circle around the aiming dot will blink, which means laser sent out. Reading will be available then. Ranging display...
Page 6
Reading display II. 2.2 Scan ranging mode Under ranging mode, long press power key to activate scan mode, pan rangefinder across targets, readings will display continuously. II. 3 “Fog” mode Under fog mode, short press to measure distance In this mode, the rangefinder will dismiss the interference of mist or rain. The shortest distance should be bigger than 25m (>25m) II.
Page 7
In pin lock mode, press power key to activate pin seeker scan function. Then target rangefinder aiming point at flagpole and scan. When to flagpole distance is measured, the reading will be kept and the flag on scree will blink to show that the flag distance is locked. Pin lock display II.
Page 8
Short press power key to measure distance and angle, after calculation, horizontal distance and angle will display alternatively. Horizontal distance Angle II. 7 “Vertical height measure” mode Aim the bottom of the target, short press power key , the distance to the target bottom will display first.
Page 9
III. When there is no reading on the internal LCD screen: 1. Make sure battery is inserted correctly and press power key 2. Make sure no object block vision of objective lens, like transparent window glass or hand etcs. 3. When measure, please hold product steadily and aim target correct, then press power key...
Need help?
Do you have a question about the LW800 GOLF PRO and is the answer not in the manual?
Questions and answers