Wiper Blades
LOCK TAB
3.
Disconnect the blade assembly
from the wiper arm:
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
344
BLADE
Remove the blade from its holder
4.
by grabbing the tabbed end of the
blade. Pull up firmly until the tabs
come out of the holder.
REINFORCEMENT
Examine the new wiper blades. If
5.
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
BLADE