Advertisement
Quick Links
WELCOME TO VERSATILE KAMADO COOKING
Your new Kamado Quickchange Gas Insert completes your existing Vision
Grills Kamado, allowing you to sear, grill, bake, and smoke all types of food
with your choice of Charcoal or Gas.
For those times you want to quickly prepare a meal without the use of
charcoal, you have the Quickchange Gas Insert to help you. Simply pull out
the removable Ash Drawer and slide in the Gas Insert, position the Heat
Exchanger, and fire it up!
Welcome to the newest innovation for versatile Kamado cooking! Before
beginning, make sure to read the following Manual completely for
instructions on operating with
PARTS
PART NAMES
1
Lava Stone
2
Stainless Steel Stone Bracket
3
Infrared Heat Exchanger
4
Gas Grill Burner Insert
4.1
Gas Grill Burner Insert Knob
4.2
Ignition Button Cap
5
Gas Supply Line w/ Regulator
6
Gas Tank Caddy
6.1
Gas Tank Caddy Knob
6.2
Gas Tank Caddy Rubber Wheel
7
Gas Supply Hose Bracket (x2)
8
Match Ignition Tool
SAFETY INFORMATION
PLEASE READ THE ENTIRE MANUAL BEFORE OPERATING YOUR VISION GRILLS KAMADO GRILL. PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE.
ATTENTION! Use caution when cooking as grill surfaces get hot. To avoid burns, always use protective gloves to adjust top and bottom vents when grill is in use. Do not
wear loose clothing near the grill.
ATTENTION! This barbecue will become very hot; do not move it during operation. For outdoor cooking use only. Do not operate grill indoors or in an enclosed space. Use
grill only in well ventilated area around the grill, free from combustible materials. Allow for at least 3 feet/1 meter of clearance around grill (house, other outdoor products,
hanging tree limbs, shrubs, etc.).
WARNING! Keep children and pets away from the grill at all times. Do not allow children to operate grill. Never leave grill unattended when in use.
Grill needs to be placed securely on a level base prior to use. Only operate grill on a hard, stable level surface (concrete patio, ground, etc.) capable of supporting the grill's
weight when loaded with food. Never operate grill on wood support surface, wood deck or similar combustible support surfaces under any conditions. Never attempt to
move grill when it is in operation or cooling down. Never operate this grill within 25 feet/7.5 meters of any flammable liquid. Never operate this grill within 10 feet/3
meters of a gas cylinder. The grill should not be placed under combustible structures, such as garage, porch, patio, or carport. Burning charcoal or propane gives off carbon
monoxide, which has no odor and can cause death.
The use of alcohol, prescription or non-prescription drugs may impair the operator's ability to properly assemble or safely operate the grill. Do not use on boats or
recreational vehicles.
CAUTION: Never use lighter fluid, gasoline, or other volatiles to start your charcoal, as they are dangerous and leave a residual taste in your food.
Briquettes that contain starting chemicals or additives.
recommended. Dispose of cooled ashes by placing them in aluminum foil, soaking with water and discarding in a non-combustible container.
When operating with gas, top vent MUST be open at all times, see instructions.
If using for outdoor kitchen, table, or enclosure a lava stone or paving stone must be placed between bottom of grill and resting surface. Do NOT rest ceramic grill body
on wooden surface.
Professional Kamado
GAS.
PART NUMBERS
VGK-VCR1
VGK-BRACKET
VGC-GPIHE
VGC-GPBI-S
VGC-GPBIK
VGC-GPIBC
VGC-GPSLR
VGC-GPTC-SS
VGC-GPTCK
VGC-GPCWHL
VGC-GPGSLC-2
VGC-MIT
Use only firelighters complying to EN 1860-3. Use utmost care when adding charcoal to grill. Electric start-up is
1
4.2
4.1
6
6.2
Gas
Insert
Patented
4
6.1
NEVER use Charcoal
3
8
Advertisement
Summary of Contents for Vision grills Quickchange Professional Kamado Gas Insert
- Page 1 SAFETY INFORMATION PLEASE READ THE ENTIRE MANUAL BEFORE OPERATING YOUR VISION GRILLS KAMADO GRILL. PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE. ATTENTION! Use caution when cooking as grill surfaces get hot. To avoid burns, always use protective gloves to adjust top and bottom vents when grill is in use. Do not wear loose clothing near the grill.
- Page 2 OFF position. Wait 5 minutes and repeat the lighting procedure. h) If you cannot solve your problem by the above steps, please contact Vision Grills Customer Service at help@visiongrills.com or www.visiongrills.com. 5. Light the gas and observe 8) If you are having trouble getting to “HIGH”, review step “7”...
- Page 3 STARTING Step 5: Place Heat Diffuser Lava Stone Spread bracket so it makes an “X” shape and lower onto fire bowl, allowing the ATTENTION: The grill needs to be cooled before switching bracket to rest on edge of bowl. Lower Lava Stone onto the bracket. Replace from the Ash Drawer to the Quickchange Gas Insert.
- Page 4 PARA LICUAR GAS PROPANO, ASÍ COMO LOS PRODUCTOS DE SU Vision Grills shall not be liable for any delay or default under this Warranty caused by any event or COMBUSTIÓN, PUEDEN EXPONERTE A SUSTANCIAS QUÍMICAS, contingency beyond Vision Grills’s control.
Need help?
Do you have a question about the Quickchange Professional Kamado Gas Insert and is the answer not in the manual?
Questions and answers
Hi, my unit is approximately 4 years old and recently started having issues with the quick change gas unit. There is an imbalance in air/propane mix causing the unit to still burn but after a short period of time something occurs and it sounds like a loud rushing of air. I know that sounds odd but it's the easiest way to describe what is happening. In the past I cleaned out the valve area adjacent to the burner, as a spider had made a web and disrupted the flow. I checked this time but there was no blockage so I'm at a loss as to what is causing the issue.
An air/propane mix imbalance in a Vision Grills Quickchange Professional Kamado Gas Insert that leads to loud rushing air sounds could be caused by debris in the heat exchanger, damage or debris in the valve connections, port, regulator assembly, or hose. These issues can affect the proper gas flow and air mixture. Inspect and clean these components to ensure correct operation.
This answer is automatically generated
@Mr. Anderson, thank you for the feedback. I've looked at those options as the source of the problem, and there are no blockages and I'm still experiencing the same challenge. Unfortunately I think I'm going to need to replace the insert.