Table of Contents
Advertisement
2-3
Rear System LEDs
No. Name
Power Button
1.
with LED
ID Button
2.
with LED
(Note)
3.
Reset Button
4.
NMI button
System
5.
Status LED
LAN2 Active/
6
Link LED
Color
Status
Green
On
Indicates the system is powered on.
Green
Blink
System is in ACPI S1 slate (sleep mode).
Indicates system is not powered on or in ACPI S5 slate
N/A
Off
(power off) or system is in ACPI S4 slate (hibernation mode).
Blue
On
Indicates the system identification is active.
N/A
Off
Indicates the system identification is disabled.
--
--
Press this button to reset the system.
Press this button for the server to generate a NMI to the
--
--
processor. If multiple-bit ECC errors occur, the server will
effectively be halted.
Green
On
Indicates system is operating normally.
Indicates a critical condition, may include:
On
- System fan failure
- System temperature
Amber
Indicates non-critical condition, may include:
- Redundant power module failure
Blink
- Temperature and voltage issue
- Chassis intrusion
Indicates system is not ready, may include:
- POST error
N/A
Off
- NMI error
- Processor or terminator is missing
Indicates a link between the system and the network or
Green
On
no access.
Green
Blink
Indicates data trasmission or receiving is occuring.
N/A
Off
Indicates no data transmission or receiving is occuring.
System Appearance
1 2 3 4 5 6
Description
- 18 -
Advertisement
Table of Contents
