Specifications - Rockford Fosgate Power Elite T3002 Installation Manual

S
PECIFICATIONS
MODEL- POWER
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4 Load Per Channel
2 Load Per Channel
1 Load Per Channel
4 Load Bridged
2 Load Bridged
Dimensions: Height
Width
Length
Amplifier Fuse Rating (Amp/Type)
Battery Fuse Rating (Amp) External
(Not Supplied)
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency
Frequency Response
Bandwidth
Slew Rate
IM Distortion (IHF)
Signal Voltage Adjustment Range
Protection
Equalization (Variable Punch Bass)
Input Impedance
These specifications are Amplifier Power Standard CEA-2006 Compliant
Specifications subject to change without notice
14
T3002
50 Watts x 2
100 Watts x 2
150 Watts x 2
200 Watts x 1
300 Watts x 1
2.3" (5.80cm)
12.9" (32.70cm)
11.8" (30.00cm)
(2) 40A / ATC
80A
>80dB A-weighted @ 2Vrms
12dB/octave Butterworth
variable from 40Hz to 400Hz
20Hz to 20kHz ±0.5dB
20Hz to 200kHz ±3dB
Variable from 150mV to 4V (RCA Input)
NOMAD - Internal analog-computer output protection circuitry
limits power in case of overload, plus short protection.
Thermal switch shuts down the amplifier in case of overheating.
Variable from 0dB to +18dB @ variable 35 to 70Hz
T4004
25 Watts x 4
50 Watts x 4
100 Watts x 4
100 Watts x 2
200 Watts x 2
2.3" (5.80cm)
12.9" (32.70cm)
16.3" (41.50cm)
(2) 40A / ATC
80A
30 Volts/µS
<0.05%
10k ohms