Measuring Radial Clearances N And R; Fig. 54: Measuring Clearances N And R; Table 42: Permissible Clearances N And R - ABB HT596341 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.17 Measuring radial clearances N and R
8.17

Measuring radial clearances N and R

Fig. 54: Measuring clearances N and R
Product
A130-M
A135-M
A140-M
A145-M
Table 42: Permissible clearances N and R
1. Push the feeler gauges (01) into the gap without clearance simultaneously at the top (N1)
and the bottom (N2).
2. Calculate clearance N and compare it with the permissible values in the table.
3. Push the feeler gauges (01) into the gap without clearance simultaneously at the top (R2)
and the bottom (R1).
4. Calculate clearance R and compare it with the permissible values in the table.
CAUTION
Clearances outside the tolerance
Serious damage to engines or property can be caused by clearances outside
the tolerance and excessively worn parts.
Have the components assessed and, if necessary, replaced by an ABB Tur-
u
bocharging Service Station.
© Copyright 2020 ABB. All rights reserved.
N [mm]
0.26 ... 0.60
0.34 ... 0.70
0.45 ... 0.90
0.56 ... 0.95
HZTL4031_EN
R [mm]
0.45 ... 0.70
0.51 ... 0.85
0.64 ... 1.00
0.76 ... 1.20
Rev.K February 2020