Table of Contents
Advertisement
tags that give you more information about a product or service as well as tags that
activate certain functions on your device.
NFC is a wireless technology with a maximum range of one centimeter, so the devices
sharing data must be held close to each other. Before you can use NFC, you must first
turn on the NFC function, and the screen of your device must be active.
The NFC detection area is located on the back of the device. Hold your device close to
another device or an NFC reader so the NFC detection areas touch each other.
NFC may not be available in all countries or regions. Using certain apps, some NFC functions
can be enabled even when the device is switched off. Note that not all devices support this
feature.
To Enable or Disable the NFC Function
1
From your Home screen, tap
2
Find and tap Settings > More.
3
Tap the NFC slider.
To Share a Contact with Another Device Using NFC
1
Make sure both devices have the NFC function turned on, and that both screens
are active and unlocked.
2
To view contacts, go to your Home screen, tap
3
Tap the contact you want to share.
4
Hold your device and the receiving device close to each other so that the NFC
detection areas of each device touch. When the devices connect, a thumbnail of
the contact appears.
5
Tap the thumbnail to start the transfer.
6
When the transfer is done, the contact information is saved on the receiving
device and displayed on its screen.
To Share a Music File With Another Device Using NFC
1
Make sure both your device and the receiving device have the NFC function
turned on and both screens are active and unlocked.
2
To open the Music application, tap
3
Select a music category and browse to the track you want to share.
4
Tap the track to play it. You can then tap
whether the track is playing or paused.
5
Make sure the track is displayed on full screen.
6
Hold your device and the receiving device close to each other so the NFC
detection areas of each device touch. When the devices connect, a thumbnail of
the track appears.
7
Tap the thumbnail to start the transfer.
8
When the transfer is done, the music file is saved on the receiving device.
9
To display the music file, double-tap the status bar to open the Notification panel,
then tap Beam complete .
This is an internet version of this publication. © Print only for private use.
.
, then tap
, then find and tap
to pause the track. The transfer works
126
.
.
Advertisement
Table of Contents
