Download Print this page

EMG SJV-HZ-EP5 Installation Information

Advertisement

Quick Links

INSTALLATION INFORMATION
EMG MODEL: JV-HZ/JV-HZ 52 SETS
SPECIFICATIONS
Pickup Types: Passive
Logo Color
Magnet Type
Inductance (Henries)
DC Resistance (kOhm)
Resonant Frequency (KHz) (1)
Resonant Frequency (KHz) (2)
Impedance at Resonance (kOhm) (1)
(1) Loaded with 250K Volume and Tone
and 20' (6M) 560pf cable
(2) Loaded with 1 MegOhm / 47pf
Installation notes:
The JV-HZ and JV-HZ 52 Sets consist of a Short (SJ-HZ) Neck Pickup and Long (LJ-HZ) Bridge Pickup. These JV-HZ Models use a side-by-side
coil design for noise-reduction and feature Alnico pole pieces for a warm, vintage tone. Alnico 5 poles are used in both JV-HZ Set pickups,
and in the Neck pickup of the JV-HZ 52 Set. Alnico 2 poles are used in the Bridge pickup of the JV-HZ 52 Set for a uniquely-smooth response.
IMPORTANT NOTE: String Ground (Earth)
It is common practice to use a bridge ground wire to reduce noise in instruments with passive pickups. An IDC connector is included to
attach your bridge ground wire to the EMG Ground Wire (single-ended). A "Ground Buss" and doule-ended Ground Wire is used to join all
common ground connections.
Included with THE SET:
2 VOLUME CONTROLS (250K)
1 TONE CONTROL (250K)
.235
(6)
.390
.310
(8)
(10)
MONO OUTPUT
JACK
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage.
If upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty.
This warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2023 Copyright EMG INC. All Rights Reserved.
SHORT J HOUSING
(91.18)
.920 (23.4)
#4 WOOD SCREW
FOR MOUNTING
MODEL:
-
SJV
HZ-EP5
LJV
Gold
Gold
Alnico 5
Alnico 5
2.38
2.80
6.89
7.60
3.5
3.5
4.0
4.0
52.31
61.54
ADJUSTMENT SCREWS (8)
GROUND
BRIDGE GROUND
CONNECTOR
EXPOSED POLE (EP) MODELS ARE SHOWN
COVERED-POLE MODELS ARE AVAILABLE
(SJ)
3.590
.730 (18.54)
1.500
R .093
(38.1)
(2.36) TYP
R .250
(6.35) TYP
-
-
HZ-EP5
SJV
HZ-EP2
Gold
Alnico 2
3.0
6.83
3.0
3.4
56.52
2 J-HZ PICKUP CABLES 9" (23cm) / 13.5" (34cm)
2 CONNECT CABLES 5.5" (14cm)
BUSS
OUTPUT CABLE 6" (15cm)
GROUND WIRES 6" (15cm)
LONG J HOUSING
(LJ)
3.700
(93.98)
1.560
(39.6)
.900 (22.8)
-
LJV
HZ-EP2
Gold
Alnico 2
3.48
7.60
3.0
3.4
65.56

Advertisement

loading

Summary of Contents for EMG SJV-HZ-EP5

  • Page 1 Warranty All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty.
  • Page 2 Installation Instructions: EMG Models: JV-HZ / JV-HZ 52 SETS General Notes: Diagram #1 Every attempt has been made to make this a solderless installation. Insert the plug onto the 3 pin header There are some instances where this is not possible: of the pickup as shown above.
  • Page 3 Included with the system is a black ground wire with a single BUSS solderless connector. Also included is an IDC connector for joining two wires together. Insert your bridge ground wire and EMG ground wire into the IDC CLOSED CRIMP (INSERT WIRES) connector as shown.

This manual is also suitable for:

Ljv-hz-ep5Sjv-hz-ep2Ljv-hz-ep2