Tristar IV-3720 - Insect Killer Manual

PARTS DESCRIPTION

1. Lamp
2. On/off button
3. Protection grid
4. Insect collection tray

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never use abrasive products.

USE

• This device is used to attract flying insects by UV light.
• If you plug the power cord into the outlet, press the on/off button and the lamp directly lightens.
• You should regularly empty the tray, always remove the plug from the outlet before you empty the tray.
• This device works under high voltage, never touch the inside when the device is connected to the wall outlet.

CLEANING AND MAINTENANCE

• If there are too many insects on the metal grid, brush the metal grid clean with a small dry brush, do not use water or any cleaning products.
• You should regularly empty the tray, always remove the plug from the outlet before you empty the tray.

TIPS AND TRICKS

Replacing the lamp

• Always remove the plug from the outlet before replacing the lamp.
• Take out the insect collecting tray.
• Unscrew the two screws which holding the protection grid, the protection grid will now tilt forward.
• Now turn the lamp and you will be able to take out and replace.
• Assemble the appliance by taking the previous steps in reverse order.

Support
You can find all available information and spare parts at service.tristar.eu!