Rimage Amigo II Setup And Installation Manual page 2

3
Set up your printer (Everest).
a. Unpack the Everest printer.
Refer to the Everest
Unpacking and Setup
Instructions included with
your Everest printer.
OR
3
Set up your printer (Prism).
a. Open the Prism printer
packing box.
b. Remove the packing
foam from the ends of the
Prism printer.
c. Remove the plastic bag
from the Prism printer.
d. Remove the top cover of
the Prism printer.
e. Remove the foam inserts.
f. Replace the top cover.
2
Ribbons
Foam
Guide
Printer
Foam
Box
Top Cover
Foam Inserts
Printer
Packing Foam
b. Place the printer on the
Amigo II so that the plastic
feet slide into the slots on
the printer plate.
Slots for feet
g. Place the printer on the
Amigo II so that the plastic
feet slide into the slots on
the printer plate.
Printer plate
Printer plate
Slots for feet
110655_H