Advertisement
Available languages
Available languages
wet clothes and the result will be wet laundry
after the drying process is over.
C
You may repeat laundry adding or removing
process as many times as you desire during
drying. However, this process will increase
the programme time and energy consumption
since the drying process will be interrupted
repeatedly. Therefore, it is recommended to
add laundry before the drying programme has
started.
C
If you select a new programme by turning
the Programme Selection knob while your
machine is in Pause mode, then the current
program is aborted and new programme
information is displayed.
Do not touch the inner surface of the drum
when adding or taking out laundry while a
programme is running. Surfaces of the drum
are hot.
Canceling the programme
If you want to stop drying and cancel the
programme for any reason after the machine has
started to run, press and hold the Start / Pause /
Cancel button for 3 seconds. Lint Filter Cleaning
and Water Tank warning symbols light up and
"End" label appears on the display as a reminder
at the end of this period.
A
As the inside of the machine will be
excessively hot when you cancel the
programme while the machine is running,
activate the ventilation program to cool it
down.
C
Machine will stop if you turn the Programme
Selection knob while it is operating. In this
case, current programme is aborted and the
new programme information appears on the
display.
End of programme
Lint Filter Cleaning and Water Tank warning
symbols light up in the programme follow-up
indicator and "End" label appears on the display
when the programme comes to an end. The
loading door can be opened and the machine
becomes ready for a second cycle.
Press On / Off button to switch off the machine.
C
If Anti-creasing function is activated and the
laundry is not taken from the machine at the
end of the programme, 2-hours Anti-creasing
programme is activated.
C
Clean the lint filter after each drying. (See
"Lint Filter / Loading Door Inner Surface")
C
Drain the water tank after each drying cycle.
(See "Draining the water tank")
46 EN
Advertisement
