Advertisement
Quick Links
MODELS
KB301-SERIES BABY CHANGING TABLES
KB301-00
Koala Kare Vertical Baby Change Table | Beige
KB301-01
Koala Kare Vertical Baby Change Table | Stainless Veneer | Grey
KB301-05
Koala Kare Vertical Baby Change Table | Grey
The illustrations and descriptions herein are applicable to production as of the date of this Installation Instructions Sheet. Revised 05/23 © 2023 by RBA Group II/Model KB301-Series/0523
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
*KB301-01 Shown
As improvements in the design and performance of RBA products are continuous, specifications may be subject to change without notice.
SYDNEY | MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz
Advertisement
Summary of Contents for rba KB301 Series
- Page 1 As improvements in the design and performance of RBA products are continuous, specifications may be subject to change without notice. The illustrations and descriptions herein are applicable to production as of the date of this Installation Instructions Sheet. Revised 05/23 © 2023 by RBA Group II/Model KB301-Series/0523 SYDNEY | MELBOURNE | BRISBANE | PERTH | AUCKLAND Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz...
- Page 2 KB301 Operations Instructions Please Note textured surfaces or a rag. We recommend that you use disinfectants and detergents that do not contain overwhelming fragrances that can mask To assure proper installation, it is suggested that inappropriate smells. a qualified person or carpenter install the Koala Baby Changing Station.
- Page 3 KB301 Installation Instructions Tools Needed Safety Gloves Drill Pencil Wall Stud Finder Measuring Tape Level Safety Glasses Phillips Head 1/8" (3mm) 7/32" (6mm) Screwdriver (regular & masonry) (regular & masonry) drill bits drill bits Hardware Provided 1/4" x 3" 8-32" x 5/16" 9/32"...
- Page 4 KB301 Installation Instructions Step 1: • Inspect contents and remove changing station from the shipping container and check for any freight damage. If damage is found, please call Koala Kare Products’ Customer Service at 888.733.3456. • Identify the best location for installing the unit. Step 2: Fig.
- Page 5 KB301 Installation Instructions Step 3: 1/4" • Mount bed and chassis by screwing two of the mounting Fig. 3 (6.4mm) screws into the pilot holes leaving 1/4" (6.4mm) exposed to allow keyhole slots to be easily mounted over the screw heads. Fig. 3 •...
- Page 6 KB301 Installation Instructions Step 6: Fig. 7 • To install the bag hook, measure up 44" (1118mm) from finished floor in the desired location and mark the wall. • Position the bag hook on the wall so that the top of the mounting plate is level with the 44"...
- Page 7 Koala Kare Products 6982 South Quentin Street, Centennial, CO 80112-3945 Main: 303.539.8300 | Toll Free: 888.733.3456 | Fax: 303.539.8399 A Division of Bobrick Website: koalabear.com | Email: customerservice@koalabear.com ©2021 Koala Kare Products, Form No. P/N 301-4 KB301_ASTM June 2021...
Need help?
Do you have a question about the KB301 Series and is the answer not in the manual?
Questions and answers