Advertisement
Quick Links
Advertisement
Related Manuals for Euroboor ADG.2E
Summary of Contents for Euroboor ADG.2E
- Page 1 User manual V2.0 EN | May 2022 Air Die Grinder ADG.2E...
- Page 2 Congratulations on purchasing this Air Die Grinder. At EUROBOOR we strive to exceed our customers’ expectations by developing and providing premium and innovative portable drilling and cutting solutions. We believe that a professional like you must be able to rely on a professional supplier.
- Page 3 Table of contents 1. Safety ........................... 3 1.1 General safety instructions .................... 3 1.2 Specific safety instructions ..................... 7 1.3 Kickback and related warnings ..................12 2. Description ........................14 2.1 Description and features ....................14 2.2 Box content ........................15 2.3 Serial number........................
- Page 4 1. Safety 1.1 General safety instructions Do not use this Air Die Grinder before you have thoroughly read and completely understood this manual, specifically the “General safety instructions” and ‘’Specific safety information”, including the figures, specifications, safety regulations and the signs indicating DANGER, WARNING and CAUTION.
- Page 5 Personal safety Stay alert, watch what you are doing and use common sense when using the Air Die Grinder. Do not use it while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the Air Die Grinder may result in serious personal injury.
- Page 6 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Only use accessories that are recommended by EUROBOOR for your Air Die Grinder. Accessories that are suitable for one tool may become hazardous when used on another tool.
- Page 7 Service Service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the maintenance section of this manual. Use of unauthorised parts or failure to follow maintenance instructions may create a risk of injury.
- Page 8 1.2 Specific safety instructions WARNING: This tool is intended to function as a grinder. Read all safety warnings, instructions, illustrations and specifications provided with this tool. Failure to follow all instructions listed below may result in electrical shock, fire and serious injury.
- Page 9 Exceeding maximum pressure rating compressed regulated tools or accessories could cause maximum pressure below explosion resulting serious injury. rated pressure attachments. Never connect to an source that capable exceeding psi. Always verify prior using the tools that source been...
- Page 10 Using inflator nozzles for duster DO NOT use inflator nozzles for duster applications cause serious applications. injury. tooIs become activated Remove hose lubricate accident during maintenance or grinding attachments, sanding tooI changes. discs, drills, etc. to the tool. Never...
- Page 11 There is a risk: of bursting tool Check for misalignment binding of damaged. moving parts, breakage of parts and other condition that affects tool’s operation. If damaged, have tool serviced before using. only accessories. identified accessory not intended for...
- Page 12 RISK OF CUT OR BURNS WHAT COULD HAPPEN HOW TO PREVENT IT TooIs that cut, shear, drill, staple, punch, Keep working part tool away chisel, etc. are capable causing serious from hands and body. injury. Other specific safety instructions Replace warning labels if they become obscured or removed.
- Page 13 1.3 Kickback and related warnings Kickback is a sudden reaction to a pinched or snagged grinding accessory. Pinching or snagging causes rapid stalling of the grinding accessory which in turn causes the uncontrolled grinding tool to be forced in the direction opposite of the accessory’s rotation at the point of the binding.
- Page 14 Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in direction opposite to the accessory’s movement at the point of snagging. Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the grinding accessory.
- Page 15 2. Description 2.1 Description and features [Image 2-1] 1. Collet nut 2. Spindle 3. Shaft (150 mm) 4. On- / off- trigger 5. Air regulator 6. Exhaust deflector...
- Page 16 The serial number is mentioned on the power tool two times: on the serial no. sticker on the Air Die Grinder shell and box. The serial number will help you, your dealer and EUROBOOR to validate and identify the power tool.
- Page 17 2.4 Technical data ADG.2E Metric Imperial Collets 6 mm 1/4” Air inlet Ø 6.35 mm 1/4” Air hose Ø 9.525 mm 3/8” Connector type Euro, Orion, ISO B Avg. Air consumption 5 SCFM Working pressure 6.3 bar 90 PSI No-load speed Max.
- Page 18 2.5 Symbols Symbol Term, meaning Explanation Be sure to read the documentation in this user Read documentation manual and specifically the “General safety instructions” and ‘’Specific safety information’’. Wear ear protection Use ear protection during operation. Wear eye protection Use eye protection during operation.
- Page 19 2.6 Environmental Separate collection. This product must not be disposed of with normal household waste. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
- Page 20 3. Assembly WARNING: Switch off and unplug the Air Die Grinder from the air supply before assembling or adjusting the tool. 3.1 Fitting the collet and grinding burr 1. A. Loosen the collet nut by using the supplied wrenches.
- Page 21 4. Using the Air Die Grinder 4.1 Air supply system For using this tool the following air supply system layout is recommended: Also take note of the following: 1. Make sure that the air compressor being used for the air tool operation supplies the correct output (SCFM).
- Page 22 6. The minimum hose diameter should be 1/4” I. D. and the fittings should have the same inside dimensions. But usually a 3/8” l.D. air hose is recommended for air supply to get the best function of air tool operation.
- Page 23 5. Before working the tool make sure the air flow adjustment knob is set in the right position. (1 = minimum speeds, 4 = maximum speed) 6. Once the air connection is in place and the correct air flow rate has been chosen, the tool is ready to be operated.
- Page 24 5. Maintenance Your EUROBOOR Air Die Grinder has been designed to operate over a long period of time. Continuous satisfactory operation depends upon proper tool care and regular cleaning. WARNING: To reduce the risk of injury, turn the grinder off and disconnect machine from the air supply before installing and removing accessories, before adjusting or changing set-ups or when making repairs.
- Page 25 Oil tool again and run 1-2 seconds. Abnormal Improper lubrication. - Lubricate the tool with EUROBOOR pneumatic oil vibration IBO.80. and/or excessive heat For any problems not in this troubleshooting table, contact your EUROBOOR distributor or sales agent from whom purchased the tool.
- Page 26 7. Exploded view & Parts list 7.1 exploded view 7.2 Parts list...
- Page 27 12 months after date of purchase. 8.2 Service To maximise the lifetime of your EUROBOOR power tool always use service and parts from an official EUROBOOR distribution channel. Whenever in need of such, always contact original...
- Page 28 9. CE declaration of conformity EUROBOOR BV declares that the following appliance complies with the appropriate basic safety and health requirements of the EC guidelines based on its design and type, as brought into circulation by EUROBOOR BV. Designation/function...
Need help?
Do you have a question about the ADG.2E and is the answer not in the manual?
Questions and answers