Table of Contents
Summary of Contents for Baker Instrument Company B9000
- Page 1 B9000 B9000 Model 3-Channel Soldering Station 3-Channel Soldering Station with soldering iron and with soldering iron and safety rest, 120V safety rest, 120V Instruction Manual 1.800.561.8187 information@itm.com www. .com...
-
Page 2: Table Of Contents
Table of Content Introduction ..................3 Product Quality ................3 Safety ....................3 Pre-operational Safety Checklist ............. 3 Operational Safety Checklist ............4 Features ....................5 Included ....................5 Specifications ..................6 Instrument Description ..............7 Operating Instructions ..............8 Setting Pre-Set Memory Channels ........... 9 Selecting Temperature Unit of Measure ......... 9 Enabling/Disabling the Soldering Iron Sleep Function .... -
Page 3: Introduction
Introduction Thank you for purchasing your BAKER 3-Channel Soldering Station with soldering iron and safety rest. Please read the following instructions carefully before using your instrument. By following the steps outlined in this manual your product will provide years of reliable service. Product Quality This product has been manufactured in an ISO9001 facility and has been calibrated during the manufacturing process to meet the stated... -
Page 4: Operational Safety Checklist
Operational Safety Checklist • Do not plug in and turn on until the tip element has been checked, or replaced and tightened. • Never touch the soldering tip. • Do not use the soldering tool in a damp or wet environment. •... -
Page 5: Features
Features • ESD-safe station, iron, and heat-resistant silicon cable for safe handling • High power performance soldering station • Three preset memory channels • High precision soldering iron with tool-less tip change • Intuitive heat control knob • Ergonomic handle •... -
Page 6: Specifications
Specifications Power Supply: 120V/60Hz Rate Power: Max. Power: 120W Temperature Range: 212 to 896°F (100 to 480°C) Accuracy: ±10% Stability: ±35.6°F (2°C) Temperature Correction Type: Digital PID correction Display: Channels: ESD Safe: Product Certifications: CE, RoHS, FCC, ETL, CSA Operating Temperature: 32 to 104°F (0 to 40°C) Storage Temperature: -4 to 176°F (-20 to 80°C) -
Page 7: Instrument Description
Instrument Description B9000 ˚F 1. Brushed Aluminum Panel 7. Intelligent Temperature Control 2. 3 Preset Channels 8. Soldering Iron Tip 3. Iron Receptacle (Interchangeable) (24V Contact-safe) 9. Bakelite 4. Power Switch (ON/OFF) (Heat-Resistant) 5. Temperature Control Knob & 10. Anti-Slip Grip Menu Button (Turn &... -
Page 8: Operating Instructions
Operating Instructions Note: When using the soldering station for the first time, it is recommended to set the temperature to 482°F (250°C). When the iron tip reaches the point where it can melt the solder, apply a fresh layer of solder containing flux on it and then increase the temperature to the desired setting. -
Page 9: Setting Pre-Set Memory Channels
Setting Pre-Set Memory Channels 1. Press the CH1 button and channel 1 will appear on the LCD display. 2. Use the temperature adjustment knob to set to the desired temperature. 3. The selected temperature will automatically save after approx. 6 seconds. 4. -
Page 10: Enabling/Disabling The Soldering Iron Sleep Function
Enabling/Disabling the Soldering Iron Sleep Function 1. Press the temperature control knob twice to access the soldering iron sleep function. 2. "LXX" will now blink on the LCD display. 3. Rotate the temperature knob to set the soldering iron sleep timer from 0 to 99 mins. -
Page 11: Setting Temperature Compensation
5. The temperature control knob can also be pressed to save the selection and skip to next setting. 6. If the soldering enters sleep mode, the auto power OFF function is now enabled as confirmed by blinking "- - -" on the screen and then the set timer begins. -
Page 12: Care And Maintenance
Care and Maintenance Performing periodic maintenance will extend the soldering iron life. Efficient soldering depends upon the temperature, quality and quantity of the solder and flux used. Apply the following tip maintenance to extend the soldering tip service life: 1. Set the temperature to 572°F (300°C). 2.
Need help?
Do you have a question about the B9000 and is the answer not in the manual?
Questions and answers