tekkiwear W4 Operating Instructions

Trampa eléctrica de Mosquitos – W4
OPERATING INSTRUCTIONS

How to use

1. Make sure the power cord is plugged in to start the mosquito control, the fan and LED light
will start working, unplug the power cord to turn off the equipment.
2. For cleaning mosquito debris, please unplug the power firstly, take the lamp with one hand
and place it on top of the trash can (in order not to drop the mosquitoes on the ground), with
the other hand wipe the box to remove the mosquitoes.
3. After cleaning the mosquitoes, you can reassemble the device. The working principle of this
product is a photocatalytic mosquito eliminator. The LED lamp attracts the mosquitoes near the
light source, the fan produces an air flow to quickly inhale the mosquitoes to the eliminator, then
it produces dry dehydration to the insects and they die.
It is non-toxic, odorless and smokeless.

Issues requiring attention

Turn off the light or reduce the light in the area when using the mosquito eliminator, so as to
avoid interference from other light sources such as sunlight, televisions, light outside the
window, etc. Avoid strong winds (such as fans, air conditioners, etc.) blowing directly on the unit;
enclosed spaces produce a better effect.
2. It is strictly forbidden to stare at the light source for a long time when the product is operating
to avoid glare of the light source in the eyes.
3. During use, the mosquito killer should be placed in a place where children cannot touch it. Do
not insert fingers or metal objects into it to avoid accidents.
4. If the power cord or fan is damaged, send it to a professional for repair or replacement to
avoid danger.
5. When not in use for a long time, unplug the power cord and put it in a safe place.

Product Parameters