Advertisement
Instruction Manual
30U / 41U Vertical Server Rack Cable Manager with Hinged Cover
CABLMANAGER3 / CABLMANAGER4
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Cable Manager (CABLMANAGER4 is 2 pieces)
• 8 x M8 Screw, Nut and Washer
System Requirements
• Open Frame server rack (2 or 4 post)
Required Tools
• 2 x Adjustable Wrench
Installation
If the rack uses L-style vertical posts, locate the mounting
1.
points along the outer side of the posts. Ensure they line up
correctly to the mounting points along the side of the Cable
Manager.
NOTE: Some racks may not have these mounting points,
so may need to be drilled or otherwise modified to
accommodate the Cable Manager.
For the most up-to-date information, please visit: www.startech.com
*Photos are for reference only
Using the screw, washer and nut, secure the Cable Manager
2.
to the side of the vertical rack posts. At minimum, make
sure the bottom and top of the Cable Manager are properly
secured.
*actual product may vary from photos
Manual Revision: 08/30/2011
Advertisement
Table of Contents
Summary of Contents for StarTech.com CABLMANAGER3
- Page 1 *actual product may vary from photos System Requirements • Open Frame server rack (2 or 4 post) Using the screw, washer and nut, secure the Cable Manager to the side of the vertical rack posts. At minimum, make sure the bottom and top of the Cable Manager are properly Required Tools secured. • 2 x Adjustable Wrench Installation If the rack uses L-style vertical posts, locate the mounting points along the outer side of the posts. Ensure they line up correctly to the mounting points along the side of the Cable Manager. *Photos are for reference only NOTE: Some racks may not have these mounting points, so may need to be drilled or otherwise modified to accommodate the Cable Manager. For the most up-to-date information, please visit: www.startech.com Manual Revision: 08/30/2011...
- Page 2 Specifications CABLMANAGER3 CABLMANAGER4 Color Black Material Steel Mounting Height Dimensions 1350.0mm x 920.0mm x 130.0mm (HxWxD) 130.0mm x 160.0mm x 160.0mm Weight 7350g 10500g Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
Need help?
Do you have a question about the CABLMANAGER3 and is the answer not in the manual?
Questions and answers