Control Panel And Wash Cycles - LG WD100C Series Owner's Manual

Control Panel and Wash Cycles

Control Panel Features
Power On/Off Button
a
• Press this button to turn the washer on or off.
• Pressing this button during a cycle will cancel that cycle and any load settings will be lost.
• The drawer will unlock after a brief pause.
NOTE
• When this button is pressed, the Normal cycle is selected by default. To modify the default options or
choose another cycle, press the cycle selector
Cycle Selector Button
b
• Press this button to select the desired cycle.
• Once the desired cycle has been selected, the standard presets will appear in the display.
NOTE
• To protect your clothing, not all settings are available on all cycle selections.
Time and Status Display
c
• The display shows the settings, estimated time remaining, options, and status messages for the
washer.
Start/Pause Button
d
• Press and hold this button to start the selected cycle.
• If the washer is running, use this button to pause the cycle without losing the current settings.
NOTE
• If the Start/Pause button is not pressed to start the selected cycle, after a delay the washer
automatically turns off and all cycle settings are lost.
K button to illuminate the display.
OPERATION 21