Operation; Dismantling; Cleaning - Parkside 383526 2107 Operating Instructions Manual

Operation

♦ Turn on the water tap. The base
appliance 1 regulates the
water pressure.
NOTE
The base appliance 1 has an
►
opening on one side through
which air is released if the wa-
ter pressure is too high. Make
sure that this opening is never
obstructed.
Adjust the shut-off valve 7
♦
(turn anticlockwise to open/
clockwise to close).
♦ Turn off the tap when you are
finished watering.
│ GB │ IE
■ 8
IB_383526_PTBS30A1_LB8.indb 8 IB_383526_PTBS30A1_LB8.indb 8

Dismantling

Unscrew the base appliance 1
♦
anticlockwise from the tap. If
you are using a garden hose,
push the front part of the coupler
back and pull off the base ap-
pliance 1.
♦ Push all of the distributor
tubes q/w out of the hose
holders 9/0.
Pull the hose holders 9/0
♦
out of the ground.
♦ Dismantle the distributor
tubes q/w from all parts.

Cleaning

ATTENTION
► Do not use caustic, abrasive
or solvent-based cleaning
materials. They can damage
the surfaces of the product.
♦ Clean the product using a
damp, lint-free cloth.
♦ Clean the connections from
time to time to ensure a tight fit.
PTBS 30 A1
10.11.2021 14:41:05 10.11.2021 14:41:05