Philips 50PUS6272 User Manual page 33

Table of Contents

Advertisement

Contrast Settings
Contrast Modes
 (Home) > Settings > Picture >
Advanced > Contrast > Contrast mode
Select Normal, Optimized for picture, Optimized for
energy saving to set the TV automatically reduces
the contrast, for best power consumption or for best
picture experience, or select Off to switch off the
adjustment.
HDR Plus
 (Home) > Settings > Picture >
Advanced > Contrast > HDR Plus
Set HDR Plus to Off, Minimum, Medium, Maximum
to set the level at which the TV automatically shows
superior contrast and brightness effect for HDR
content.
Note: Available when HDR (High-Dynamic Range)
signal is detected.
• The TV can play HDR programmes* from HDMI 2 or
HDMI 3 connections, broadcasting, from an Internet
source (e.g. Netflix) or from a connected USB memory
device.
* Only HDR10 and Hybrid Log Gamma HDR are
supported
Dynamic Contrast
 (Home) > Settings > Picture >
Advanced > Contrast > Dynamic contrast
Select Maximum, Medium, or Minimum to set the
level at which the TV automatically enhances the
details in the dark, middle and light areas of the
picture.
Video Contrast, Gamma
Video contrast
 (Home) > Settings > Picture >
Advanced > Contrast > Video contrast
Press the arrows  (up) or  (down) to adjust the
video contrast level.
Gamma
 (Home) > Settings > Picture >
Advanced > Contrast > Gamma
Press the arrows  (up) or  (down) to set a non-
linear setting for picture luminance and contrast.
Ultra Resolution
 (Home) > Settings > Picture > Advanced >
Sharpness > Ultra Resolution
Select On to have a superior sharpness in line edges
and details.
Picture Clean
 (Home) > Settings > Picture > Advanced >
Picture clean
Noise reduction
 (Home) > Settings > All
settings > Picture > Advanced > Picture clean
> Noise reduction
Select Maximum, Medium, Minimum to set the
level for removing the noise in video content.
Noise is mostly visible as small moving dots in on-
screen picture.
MPEG Artefact Reduction
 (Home) > Settings > Picture >
Advanced > Picture clean > MPEG Artefact
Reduction
Select Maximum, Medium, Minimum to have
different degress of smoothing the artefects in digital
video content.
MPEG artefacts are mostly visible as small blocks or
jagged edges in on-screen images.
Motion Settings
 (Home) > Settings > Picture >
Advanced > Motion
Motion Styles
 (Home) > Settings > Picture >
Advanced > Motion > Motion Styles
Motion styles provides optimised motion setting
modes for different video content.
Select Off to switch off or select one of the motion
styles to have better viewing experience.
(Movie, Sports, Standard, Smooth or Personal)
Not available for below cases:
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

6272 series55pus6272

Table of Contents