Accessory Port Menu; Using Olympus Penpal - Olympus PEN E-PL8 Instruction Manual

Accessory Port Menu

Using OLYMPUS PENPAL

The optional OLYMPUS PENPAL can be used to upload pictures to, and receive
pictures from, Bluetooth devices or other cameras connected to an OLYMPUS
PENPAL. Visit the OLYMPUS website for more information on Bluetooth devices.
Display the # Accessory Port Menu in advance (P. 87).
 Sending images
Resize and upload JPEG images to another device. Before sending images, make
sure that the receiving device is set to the mode for receiving data.
1
Display the picture you wish to send full frame and
press z.
2
Select [Send A Picture] and press z.
• Select [Search] and press z in the next dialog. The
camera searches for and displays Bluetooth devices
in range.
3
Select the destination and press z.
• The image will be uploaded to the receiving device.
• If prompted to provide a PIN code, enter 0000 and
press z.
 Receiving images/adding a host
Connect to the transmitting device and download JPEG images.
1
Select [AOLYMPUS PENPAL Share] in
# Accessory Port Menu (P. 107).
2
Select [Please Wait] and press z.
• Perform operations for sending images on the sending
device.
• Transmission will start and a [Receive Picture Request]
dialog will be displayed.
3
Select [Accept] and press z.
• The image will be downloaded to the camera.
• If prompted to provide a PIN code, enter 0000 and
press z.
JPEG
Send A Picture
z
Erase
Back Set
Send Picture
Sending
Cancel
Accessory Port Menu
1 OLYMPUS PENPAL Share
OLYMPUS PENPAL Album
2
Electronic Viewfinder
c
#
Back
Receive Picture
Receiving
Cancel
4
Set
EN 107