Download Print this page
Carson WS-295-74 Technical Bulletin

Carson WS-295-74 Technical Bulletin

14v/28v positive gnd

Advertisement

Quick Links

WS-295-74 PG (Positive GND)
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
TB0327B
Carson Manufacturing Co., Inc.
Phone: (888) 577-6877
TECHNICAL BULLETIN
MAN
WAIL
YELP
PA
RADIO
TWO TONE
WS-295
INSTALLATION AND
OPERATING MANUAL
WS-295-74 14V
WS-295-74 28V
Carson is a trademark of Carson Manufacturing Company, Inc.
5451 North Rural Street
Indianapolis, IN 46220
Fax: (317) 254-2667
www.carsonsirens.com
SIREN
ON
OFF
Page 1 of 8
P.A. VOLUME
10/18/03

Advertisement

loading
Need help?

Need help?

Do you have a question about the WS-295-74 and is the answer not in the manual?

Questions and answers

Summary of Contents for Carson WS-295-74

  • Page 1 WS-295-74 28V WS-295-74 PG (Positive GND) Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
  • Page 2 Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
  • Page 3: Installation

    INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties. SAFETY PRECAUTIONS For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions.
  • Page 4 ELECTRICAL CONNECTIONS Disconnect vehicle battery before making any electrical connections. Electrical connections to the amplifier are made using the wiring harness supplied. If the amplifier needs service the connector can be easily removed without unwiring the harness. The power supply for the amplifier must be capable of delivering peak currents up to 50 amps for adequate short circuit protection and reliable operation.
  • Page 5: Operation

    OPERATION Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines) WAIL SIREN YELP...
  • Page 6 REMOVE COVER RADIO VOLUME ADJUST (ON P.C. BOARD) 58/80 3AG FAST ACTING FUSE 20AMP (WS-295-74 14,PG) POWER OUTPUT SWITCH 10AMP (WS-295-74 28) (INSIDE SIREN ON CHASSIS) POWER OUTPUT ADJUST The POWER OUTPUT adjustment is a one time setting which depends on the speaker(s) used.
  • Page 7 Try adjusting the internal radio volume control. RETURN If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e-mail at service@carsonsirens.com...
  • Page 8 Lamp, T-1-3/4 14V Bi-pin (Chicago Miniature Lamp, Inc. #7382) CP3570 Microphone CP3633 Microphone clip with mounting screws ES00004-07 Switch, pushbutton assembly siren (Switch alone is Grayhill #40-100, Cap #22-0440176-0) (Carson #CP2633) 2FA53-73 Switch, toggle power (Carling Switch #2FA53-73) CP3585 Switch, rotary function (top tabs folded and soldered) 2N5884...

This manual is also suitable for:

Ws-295-74 pg