Advertisement
SEA
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
HDG MODE
TARGETS
SCREEN
MARPA
POWER
Soft keys
Press to select option, or highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft key
leads to a further display of soft key options.
ENTER
Confirms selection and (if appropriate) clears current
soft key labels. It either performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, cursor takes control of
the object.
When arrow-head cursor symbol is displayed, drops
the object under cursor control.
CLEAR
Cancels operation in progress and returns to previous display.
Deletes an object/function under cursor control.
Trackball
Controls cursor position on screen, the sliders and setup options.
POWER
Press and hold until unit beeps to turn on display.
Press to toggle between Standby and Transmit.
Press for 3 seconds to turn off display.
Quick Reference Card
GAIN
DISPLAY
SEA
MOB
MARKS
MULTI
VRM/EBL
ALARMS
RANGE
ENTER
CLEAR
MENU
CRT Display Unit Controls: Pathfinder HSB Radar
GAIN and SEA
Controls for background noise (speckle) and sea clutter.
- Press for soft keys display.
- In MANual mode, turn knob to adjust setting.
AUTO SEA
GAIN
TUNE
HARBOUR OFFSHORE MAN
AUTO MAN
AUTO MAN
Press soft key to toggle between Auto/Man.
Turn knob to adjust slider, and press ENTER to finish.
MULTI
Controls display contrast and brilliance, key lighting, rain clutter
around the vessel (RAIN), distant rain clutter (FTC), guard zone
alarm sensitivity and tuning the receiver.
- Press to display slider, options and soft keys.
- use trackball to highlight option in list.
CONT
Press soft key (if appropriate) to toggle highlighted
BRILL
option between ON/OFF or between AUTO/MAN.
LIGHTS
RAIN
Turn knob to adjust slider setting of highlighted option.
FTC
Press ENTER to finish.
ALARM
TUNE
ALARMS
Used to control guard zones.
- Press soft key to place guard zone if one not already placed.
Adjust size/shape using trackball, press ENTER to finish.
- Press to display soft keys if guard zone already placed.
GUARD 1
GUARD 2
OFF ON
OFF ON
Use soft key to toggle zone ON or OFF.
Adjust size/shape using trackball, press ENTER to finish.
RANGE
Controls range scale.
Range scale and range rings are shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale faster.
DISPLAY
Controls display mode and windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, then ENTER.
- Press and hold for 2 seconds for full page radar display.
WINDOWS
SELECT
OFF ON
WINDOW
ZOOM...
Press WINDOWS soft key to toggle window on/off, or return to
full screen.
Zoom: Press ZOOM key to display Zoom Window options.
Move Zoom box using trackball, press ENTER to finish.
MARKS / MOB
Controls placing marks, and Man Overboard function.
- Press for soft keys display, then press soft key to place mark.
- Press and hold for 2 seconds to activate or cancel MOB.
- Press ENTER to finish.
PLACE MRK
PLACE MRK
AT CURSOR
AT VESSEL
VRM/EBL
Used to measure range and bearing to/between targets.
- Press to place VRM/EBL if one not already placed.
Adjust position using trackball, and press ENTER to finish.
- Press to display soft keys if VRM/EBL already placed.
VRM/EBL
VRM/EBL1
VRM/EBL2
DATABOX
OFF ON
OFF ON
FLOAT!
OFF ON
Use soft key to toggle VRM/EBL on or off.
Press FLOAT to access float options for existing VRM/EBL.
Press VRM/EBL DATABOX to toggle data box display off/on.
MENU
Provides access to setup options.
- Press to display soft keys.
SYSTEM
RADAR
MARPA
SET UP!
SET UP!
SET UP!
Press soft key to display required setup menu, then use trackball to
select option and soft key to change setting.
Press ENTER to close menu, and CLEAR to finish.
D4111-2
Advertisement
