Raymarine E46034 Install Manual

E46034 Flush Mounting Kit
RAY48
RAY54
Pre-punched gaskets sheet
70 mm
(2.75")
ALLOW 110 mm (4.3") FROM RADIO MOUNTING SURFACE FOR RADIO DEPTH.
79 mm (3.1")
for Ray48 & Ray54/E
172 mm (6.8") ALLOWANCE FOR FLUSH MOUNT KIT
135 mm (5.3") CUTOUT
Ray48 Mounting Template
CUT OUT SHADED AREA
190 mm (7.5") ALLOWANCE FOR FLUSH MOUNT KIT
150 mm (5.9") CUTOUT
Ray54/E Mounting Template
CUT OUT SHADED AREA
167 mm (6.6")
5583-002 Flush Mount Assembly
Bracket Subassembly, qty 2
Gasket, 1 ea, Ray48 & Ray54/E
Screw, M6, qty 2, and
Lock Washer, M6, qty 2
1. Use template to cut out required opening in console.
2. Remove appropriate Gasket from pre-punched sheet
and place on radio, behind front fascia.
3. Insert unit into cutout in console.
4. Attach both Bracket Subassemblies to radio using M6
Screws and Lock Washers.
5. Tighten Bracket Subassembly mounting screws until
unit snugly attached to console.
8.5 mm (.33")
10 mm (.4")
51 mm (2")
9 mm (.4")
18.5 mm
(.73")
8 mm (.3")
20 mm
(.8")
CUTOUT
8 mm (.3")
61 mm
(2.4")
CUTOUT
10 mm (.4")
3033-010