Page 1
Instructions for installation and use IKI Wood burning stoves Mini-IKI Original IKI Maxi-IKI Löyly-IKI jr. Löyly-IKI 6/2023...
Page 2
P a g e IKI Wood burning stoves | Instructions for installation and use • The stove must not be used for any other purpose than heating a sauna, for example drying clothes, using it as a heater in a building site, etc.
P a g e IKI Wood burning stoves | Instructions for installation and use Table of contents Table of contents ............................2 Contents of delivery ..........................7 Installation of the stove ..........................8 2.1 Mini-IKI and Original IKI ........................... 8 2.2 Setting the stones into stove: ........................
Page 4
P a g e IKI Wood burning stoves | Instructions for installation and use IKI-Kiuas Ltd. EN 15821:2010 NB 2450 AVCP3 Multi firing sauna stoves fired by solid wood fuel Mini-IKI / (Plus) DoP 07122015 Fire safety Passed (initiation, risk to adjacent elements)
Page 5
P a g e IKI Wood burning stoves | Instructions for installation and use IKI-Kiuas Ltd. EN 15821:2010 NB 2450 AVCP3 Multi firing sauna stoves fired by solid wood fuel Original IKI / (Plus) DoP 10252015 Maxi-IKI / (Plus) Fire safety...
Page 6
P a g e IKI Wood burning stoves | Instructions for installation and use IKI-Kiuas Ltd. EN 15821:2010 NB 2450 AVCP3 Multi firing sauna stoves fired by solid wood fuel Löyly-IKI jr. DoP OL9182013 Fire safety Passed (initiation, risk to adjacent elements)
Page 7
P a g e IKI Wood burning stoves | Instructions for installation and use IKI-Kiuas Ltd. EN 15821:2010 NB 2450 AVCP3 Multi firing sauna stoves fired by solid wood fuel Löyly-IKI DoP 20402016 Fire safety Passed (initiation, risk to adjacent elements)
• Note that IKI stoves have a lot of stones and are heavy IKI wood burning stoves are recommended to be installed primarily either in a brick chimney, • ceramic chimney or an air-cooled chimney. The outer diameter of the stove’s smoke pipe is 115...
P a g e IKI Wood burning stoves | Instructions for installation and use 2. Installation of the stove 2.1 Mini-IKI and Original IKI Check that all parts belonging to the stove are Set the furnace on a solid and fireproof base included in the delivery.
The mesh and the furnace intermediate space must be stoned as accurately as possible so that the stones will cover the furnace. If the stove is for professional usage (public bath etc.), IKI recommends KERKES-ceramic sauna stones (www.kerkes.fi) on the surfaces that touch directly the heart of the stove.
As the stove consists of a separate furnace and fire tube and two separate frames, the installation is done in phases as follows: 1. Assemble the lower part of the stove as in Mini-IKI, Original-IKI and Maxi-IKI, instructions without setting the stones yet to the top part.
3.2 Protective base for the stove IKI stoves also have a “IKI protective base” for the stove (IKI accessories). If that is used the stove can also be installed to the floor with flammable surface. A protective base for the stove also reduces the thermal radiation that a tiled and waterproof floor is possibly exposed to.
The connection height of the stoves is given from the floor to the center of the chimney when stove furnace is installed on its stone legs. ATTN! When using the “IKI protective base” the height of the connection point rises 70 mm accordingly.
The mesh’s of the 50 and 100 cm Plus part have an opening that can be closed with a flange for the outlet pipe. If the flue connection is upwards, e.g. to an IKI T600 stove chimney, the mesh can be stoned from the opening.
7. Instructions for using the stove The heating time of an IKI stove is approximately one hour, depending on the size of the sauna room and the stove. The correct bathing temperature for the IKI stoves is approximately 55-70 degrees.
Dimensional drawings The outer diameter of the stove’s smokepipe is 115 mm. The distance from the center of the smokepipe to the back of the heater rim is in MINI-IKI 130 mm and in Original,Maxi-IKI and Löyly-IKI 150 mm. IKI Wood burning stoves | Finnish high-quality craftsmanship...
P a g e | 16 IKI Wood burning stoves | Instructions for installation and use Sweeping instructions 1. Start by removing the stones from the stove. 2. Open the hatch in the chimney pipe on the stove (as seen in picture below). This does not require any tools.
P a g e | 17 IKI Wood burning stoves | Instructions for installation and use Ventilation of the sauna and getting compensation air A wood burning stove needs sufficiently compensation air in order to burn well. A sauna room also requires oxygen-rich breathing air for the sauna bathers.
P a g e | 18 IKI Wood burning stoves | Instructions for installation and use Example pictures of a correct air ventilation IKI Wood burning stoves | Finnish high-quality craftsmanship...
IKI Wood burning stoves | Instructions for installation and use Warranty IKI-Kiuas Ltd. grants its products a warranty according to the following conditions. The manufacturer guarantees the quality and functionality of its products for the duration of the warranty period. The warranty applies to products sold and in use within EU Region.
Page 21
P a g e | 20 IKI Wood burning stoves | Instructions for installation and use 8. Guarantee the continuation of appropriate Warranty Statement found on the basis of the manufacturer will repair or replace the defective product. Repair or replacement is done at the expense of the manufacturer.
Page 22
P a g e | 21 IKI Wood burning stoves | Instructions for installation and use IKI Wood burning stoves | Finnish high-quality craftsmanship...
Page 23
P a g e | 22 IKI Wood burning stoves | Instructions for installation and use IKI Wood burning stoves | Finnish high-quality craftsmanship...
Page 24
P a g e | 23 IKI Wood burning stoves | Instructions for installation and use IKI Wood burning stoves | Finnish high-quality craftsmanship...
Need help?
Do you have a question about the Mini-IKI and is the answer not in the manual?
Questions and answers