2. Power Distribution Unit Overview
2.1
System description
The power distribution unit is intended to supply AC mains power and various DC power to
electrical or electronic devices as a central power switch with emergency stop function.
The power distribution unit has a modular design and can be configured by the customer.
Due to the modularity not all possible configurations can be described in this
manual.
For further technical information and configuration options, please refer to
the relevant data sheets and the online configurator at schroff.nvent.com.
Default features
•
19" 3 U aluminium subrack
•
Main ON/OFF by a 2-pole circuit breaker
•
Circuit breaker panel
•
Emergency stop system
•
Status LEDs for phase presence and emergency stop
•
ON/OFF button for switched outputs
2.2
Possible configuration options
2.2.1 Mains input
•
120 V AC input, 12 A, 2.5 m cable with flying leads or NEMA Type 5-20P connector
•
120 V AC input, 16 A, 2.5 m cable with flying leads or NEMA Type 5-20P connector
•
120 V AC input, 24 A, 2.5 m cable with flying leads or NEMA Type L5-30P connector
•
208 / 240 V AC input, 12 A, 2.5 m Cable with flying leads or NEMA Type 6-20P
connector
•
208 / 240 V AC input, 16 A, 2.5 m Cable with flying leads or NEMA Type 6-20P
connector
•
208 / 240 V AC input, 2430 A, 2.5 m Cable with flying leads or NEMA Type L6-30P
connector
Date: 2023/06/16
Page
: 8 of 26