Assembling Your Vacuum
Push/press fit the hose into the lid opening. (Fig 7)
•
Fig. 7
To connect the hose and attachment wand, slide the hose over the hose end wand
•
attachment and over the bump by approx. ½ inch. (Fig. 8)
Take the hose end attachment wand and connect to the lower attachment wand (utensil
•
end). (Fig.9)
Fig. 9
Secure the utensil to the end of wand. Align the brass ring with the groove on the tool to
•
ensure a secure fit (Fig. 10)
Fig.10
6
Fig. 8