Download Print this page

Yoda Smart Home MAGNETIC DELUXE YSH Series Quick Start Manual

Advertisement

Quick Links

MAGNETIC_Deluxe_15R YSH
In order to fully explore available functions of MAGNETIC DELUXE YSH series please take a moment and read this manual before using the device.
MAGNETIC DELUXE YSH transmitters are compatible with all YOODA SMART HOME brand devices.
MAGNETIC Deluxe YSH transmitters are dedicated to two-way communication.
1. General information
15-channel MAGNETIC DELUXE YSH remote control,
white (MAGNETIC Deluxe_15R YSH)
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
2. Detailed description
CHANNEL - button
15-channel transmitter
1. Estimated battery lifespan is 1 year if the device runs 4 commends a day in average.
2. Batteries should be changed when receiving device stops reacting to commands.
3. When replacing the battery, pay attention to the correct polarity.
Batteries contain substances that may be hazardous to health and may pollute the environment. Used batteries should
be disposed of properly.
LCD display
UP button
STOP button
DOWN button
CHANNEL + button
(front)
1. Control:
can control single motor, or a group
of up to 20 motors on each channel
2. Range:
200 meters outdoor,
35 meters indoor
3. Battery:
CR2450
4. Power supply:
3 V
5. Dimensions:
130 x 45 x 10 mm
6. Transmitting power:
10 mW
7. Operating temperature:
from 0°C to 50°C
8. Protection degree:
IP 30
P2
programming button
15-channel transmitter
1
(back)

Advertisement

loading

Summary of Contents for Yoda Smart Home MAGNETIC DELUXE YSH Series

  • Page 1 MAGNETIC_Deluxe_15R YSH In order to fully explore available functions of MAGNETIC DELUXE YSH series please take a moment and read this manual before using the device. MAGNETIC DELUXE YSH transmitters are compatible with all YOODA SMART HOME brand devices. MAGNETIC Deluxe YSH transmitters are dedicated to two-way communication. 1.
  • Page 2 3. Active channel selection Pressing UP or DOWN button exits active channel selection mode. Repeat the following procedure to set the number of active channels. Press simultaneously and hold down the CHANNEL + Use the CHANNEL + or CHANNEL - buttons Press the STOP key to con rm your choice.