TecTecTec SPROWILD Quick Start Manual

A
G
F

INSTRUCTIONS FOR OPTIMAL USE

1. Remove the lens cap and all rubber protection from the optics
as pictured.
2. Connect the scope tapped hole (3) to the tightening screw
held below the tripod platform.
3. Always aim your objective in the direction of magnification
before bringing them to your field of view.
4. Turn the magnification ring (1) to the lowest level then block out
straight light by extending the sunshade (4) of the objective lens.
5. The sunshade also shields the objective lens from mechanical
damage and guards against fingerprints and precipitation.
6. Close one eye and with your other naked eye, aim for an
observation point, then bring your eye onto the eyepiece
to view that same point.
7. Turning the small wheel (2) allows to focus the lens to the object to be watched until you get a crystal clear view.
8. Adjust the magnification ring to a desired level depending on the distance to the target.
9. Quickly adjust the direction of the spotting scope thanks to the tripod handle (5), by untightening it then moving
the assembly till your target.
10. Dry your spotting scope quickly and completely after contact with a liquid without using compressed air.
NEVER OBSERVE THE SUN OR ANY OTHER LIGHT SOURCE DIRECTLY USING YOUR OPTICS
B
C
E
D
REGISTER TO ACTIVATE
YOUR WARRANTY
Scan the QR Code or visit:
https://tectectec.com/warranty
THANK YOU
for choosing the TecTecTec !® SPROWILD Spotting Scope.
Any questions, suggestions, or concerns with this product,
can be directed to: cs@tectectec.com
WHAT'S INCLUDED
A) 1 x 20 - 60 x 60 MM SPROWILD Spotting Scope
B) 1 x Carrying bag with shoulder strap
C) 1 x Tripod with quick operation
D) 1 x Smartphone and tripod
E) 1 x Eyepiece lens cap
F) 1 x 60mm objective lens cap
G) 1 x Microfiber cleaning cloth
4
5
1
2
3