Honda Accord Sedan 2021 Owner's Manual page 88

Indicator Name
• After you have set the power mode
Malfunction
Indicator
• Comes on if there is a problem with
Lamp
• Blinks when a misfire in the
On/Blinking
to ON, the vehicle performs system
checks. However, if the readiness
codes have not been set by that
time, this indicator will blink five
times and then go off.
the emissions control systems.
engine's cylinders is detected.
Explanation
• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 641
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe place
where there are no flammable objects. Stop
the engine for 10 minutes or more, and
wait for it to cool down. Then, take your
vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 616
uuIndicatorsu
Message
Continued 87