Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Casecore Games Explorer Case Pro
Summary of Contents for Casecore Games Explorer Case Pro
- Page 1 Explorer Case Pro User Manual Casecore Games © 2023 www.casecoregames.com...
- Page 2 1. Important safety instructions ● Before using the product, read these instructions carefully. Keep this document in a safe place for future reference. ● Only use this device in dry, clean and well ventilated places, minimum clearances for ventilation are top: 10cm, rear: 10cm, sides 10 cm.
- Page 3 2. Prop specifications Model name Explorer Case Pro Dimensions (Width x Height x Depth) 47cm x 35cm x 16.5cm Weight 8.6 kg Tilt Range 45° Operating Temperature 0°C to 35°C Operating Humidity < 80% Battery charge input power 5V DC...
- Page 4 4. Gameplay mechanics...
- Page 5 The versatile design of the prop allows for numerous usage possibilities. Included above is a diagram illustrating the basic mechanics of gameplay achievable with this prop. You can opt to run the game in two different modes: linear mode, which involves activating one module after another in sequence, or non-linear mode, which allows for all five modules to be tackled simultaneously.
- Page 6 8. Charging the battery At the back of the case, there is a USB type B slot. Use the provided cable along with any 5V DC charger to charge up the battery. The batteries are protected by over discharge and overcharge, but don’t leave the device on constant charging when storing.
- Page 7 Scroll the list and look for the address or HC-05 name that you paired in the previous step and click on it. After a short while the case will be connected to your phone, you should see that the connection status changes to connected on the app and the case should change to blue leds and bluetooth message should be displayed on screen, only then the case is ready to be programmed! All the changes you make will be active after power reset.
- Page 8 12. Setting up hint tags The prop support up to 5 hints that can be displayed during gameplay, with the prop you will have 5 cards, but if you like you can use other 13.56mHz rfid tags like stickers or badges as long as they are good quality and can be put close enough to the scanning sensor behind the screen.
Need help?
Do you have a question about the Explorer Case Pro and is the answer not in the manual?
Questions and answers