PETDIAR T720 - Dog Training Collar Manual

SAFETY INSTRUCTION

Training collars are used to train the dogs and not for punishment. Use properly with care and the collar can be a safe and effective tool to train, building communication and strengthen your bond with your best friend. Obey all safety messages that follow this instruction to avoid possible injury.

REINFORCE LEARNING BEHAVIOURS

If your dog knows the command but responds inconsistently or acts slower than your requirement, a training collar can sharpen his skill.

For example, you have taught your dog to come when called, but over time he responds slower. You can communicate with him via the remote trainer, so that he immediately responds to your call

1. Set the collar to initial stimulation level and test it.
2. Fit the collar on your dog's neck along with his regular collar.
3. Let him roam around the training area. Then give the command and simultaneously press the stimulation button.
4. The instant your dog moves toward you, stop stimulation and praise him.
5. If he stops before he reaches you or turns away repeat the command and continue the stimulation. Again, stop at the instant he runs to you and reward him by praising him or feeding him a treat. Repeat this for 3 or 4 times.

Tips

1. If he doesn't get it for the first few times, don't give up and do not increase the stimulation. Try to work on this a couple of times per day.
2. During the training period never give the command if you are not able to enforce it. Your dog has to make the mental connection between the static stimulation/vibration/beep to his behavior (may take a week or more for some dogs)
   Altogether, both methods of stopping unwanted behavior and reinforcing learning behaviors can be applied to nearly every training scenario.

BEFORE USING THE DOG TRAINING COLLAR

1. Do not expose to extreme heat or store at temperatures above 113°F or 45°C.
2. Please always keep the training collar out of reach of children.
3. Charge the remote transmitter and receiver at least 2 hours when receive the item. The collar cannot receive any signals while it is being charged.

WHEN USING THE DOG TRAINING COLLAR

1. Avoid leaving the collar on the dog for more than 12 hours per day.
2. When possible, reposition the collar on the pet's neck every 1 to 2 hours.
3. Check the fit to prevent excessive pressure.
4. Take off the receiver when your dog swimming.
5. The receiver will turn off automatically after 10 seconds "beep" sound when battery is low.

PACKAGE CONTENTS

SPECIFICATIONS

MAINTENANCE

1. Please examine regularly to ensure tightness of the transmitter and eliminate any external damages.
2. Clean the screw caps with alcohol weekly.
3. Examine your dog's neck and carry out weekly cleanup.
   The battery is rechargeable. In order to maintain battery life, please charge it once a month if it is not used.

KEY DEFINITION

1. Power Button: Press to turn the transmitter on and off.
2. Tone Button: Press the tone button and the receiver beep once.
3. Tone level is not adjustable.
4. Static Stimulation Button: Press the stimulation button and the receiver emits an static stimulation once.
5. Vibration Button: Press the vibration button and the receiver emits a vibration once.
6. +/- Button: Adjust levels of vibration and static stimulation from 1-100.
7. Channel Button: Press to select a dog channel (dog1/dog2/dog3)7 LED Light Button
8. LED Light
9. Indicator Light
10. Power Button
11. Contacts Points: Choose a suitable length to fit for different thickness of dog hair.

OPERATION AND FUNTIONS

Charge the Remote Transmitter

1. Connect the charger cable to the charging port.
2. Plug the charger into a standard outlet.
3. The battery icon will flash during charging and be solid when charging is completed.

To turn the transmitter on and off

1. Press power button to turn on/off the transmitter. The backlight is on/off.
2. The backlight will stay for about 30 seconds, if no operation then the backlight off.

Charge the Collar Receiver

1. Open the rubber cover, connect the receiver to a charger into a standard socket.
2. The indicator light flashes red slowly during charging, while the red light keeps on when fully charged.

To Turn the Receiver Collar on and off

1. Turn on: Press the power button once, the receiver will make a short "beep" sound, means that the receiver is turned on.
2. Turn off: Press the power button once, the receiver will make a long "beep" sound and LED light no flash any more.

Check the Receiver Power

When the receiver is turned on, press the power button twice quickly to check the power:
Receiver beeps 5 times, representing 100% (80-100%)
Receiver beeps 4 times, representing 80% (60-80%)
Receiver beeps 3 times, representing 60% (40-60%)
Receiver beeps twice, representing 40%(20-40%) Receiver beeps once, representing 20% (1-20%)

PAIRING AND TESTING

How to Pairing

1. Turn on the remote and select one of the dog channel by pressing the CH button.
2. Adjust vibration or static shock level by pressing "+" or "-" button.
3. Hold power button on the receiver for 2 seconds, when the indicator light keep flashing for 10 seconds, press any button on the remote to pair.
4. If you have multiple receivers, simply choose a different channel and pair as per the same instructions.

Test the Training System

1. Static Stimulation Function Test

Static stimulation function can not be seen with the naked eye, please use our test light. Press the static stimulation function button, the test light will shine

2. Vibration Function Test

Press the vibration function button, the receiver will shake.

3. Tone Function Test

Press the tone button, the receiver will make a sound.

1. Please keep in mind the dog channel you choose and do not change to other one, or the remote control will be invalid.
2. You need to pair remote transmitter and receiver before use it on the dog. Please follow the manual for the first use.
3. The transmitter will fall into sleep mode after 30 seconds if no interaction. Please reactivate it by pressing any button on the remote.
4. When the transmitter turned off, it will not produce any functions when press buttons except for the LED light button

How to Wear Receiver Collar Correctly

1. Correct wearing position helps healthy and effective pet training. Receiver shall be placed on bottom of the pet's neck, and the screw cap must contact the pet's skin directly.
2. If you dog has thick fur on the neck, please use longer screw caps.
3. The anti-abrasion buckle could prevent skin abrasion. It is recommended to use it 2 to 3 times a week.
4. The space between receiver collar and the pet's neck shall be maintained to a finger distance, which can't be too loose, otherwise statice effectiveness shall be badly influenced.
5. The extra part of the nylon strap can be trimmed, or be handled with other methods.

Reference weight for dogs
Large Dog (Body height above 24 inch, Weight above 88 lbs)
Medium Dog (Height 16-24 inch, Weight 24.2-66 Ibs)
Small Dog (Height 10-16 inch, Weight 8.8-22 Ibs)
Mini Dog (Height under 10 inch, Weight under 8.8 Ibs)

FAQ

Q: Once my pet is trained and has been obeying my commands, is it still necessary for my pet to continue to wear the receiver collar?
A: You may need to reinforce your pet's memory with the Receiver Collar from time to time.

Q: How old my pet can use Pet Training systems?
A: DO NOT use on puppies younger than 6 months.

Q: Can I use Pet Training systems with more than one pet?
A: Yes, you can simply add one more or two receiver collars to the system to control two or three pets, because three dog channels are available with one transmitter.

Q: What's the function of anti-abrasion buckle?
A: Anti-abrasion buckle could prevent skin abrasion, avoids hurting dog's skin when you do not need to use static shock function, and also it could be insulated from electricity.

Q: What should I do if my pet's neck becomes red and irritated?
A: Discontinue to use of the pet training collar for a few days. If the condition persists beyond 48 hours, please ask your veterinarian to check. Continue to monitor your pet's skin condition closely even if the skin become to normal.

Q: Can I attach a leash to the receiver collar?
A: NO. This can result in pulling the screw caps (contact points) too tightly against your pet's neck. Use a separate collar placed above the receiver collar.

Q: How do I know when to charge transmitter and receiver?
A: For transmitter: the symbol will show up on the left down side of LCD screen. For receiver collar: if you hear 10 Seconds beep sound, you have to get it charged.

Q: How long can I leave Receiver Collar on my dog?
A: The Receiver Collar is not designed to be worn constantly. We recommend to wear the collar on your dog less than 12 hours out of every 24-hour period.

Q: How long should I process my training session for my pet?
A: Training sessions should be kept positive and short, it is better for about 10-15 minutes long each time

Q: What are the proper levels of Vibration and Static Stimulation for my pets?
A: Try to find the best suitable levels of Vibration and Static Stimulation for your pet starting from the lowest level. Excessive levels of stimulation shall cause strong response from your pet.