Selecting A Destination On The Map - Honda CR-V 2016 Manual

Selecting a Destination on the Map

Select a new destination when en route by selecting a location on the map.
uuChanging Your DestinationuSelecting a Destination on the Map
1. Scroll the map to position the
cursor over your desired
destination, adjusting the map
scale as necessary.
u If the address displayed is not
the desired location, press the
BACK button and repeat the
procedure.
2. Select an icon from the right side
of the screen.
3. Select Set as Destination.
2 Calculating the Route P. 98
4. Select Clear Current Route or
select a location to add to the
destination list.
u The route is automatically
recalculated and displayed on
the map screen.
1 Selecting a Destination on the Map
Select the list open/close tab to open the list.
2 Map Screen during Scrolling P. 11
The following icons are available.
•
: Traffic*
•
: Map Icon
•
: Exit Info*
•
: Street
•
: Address Book/Home
* These icons are only available in certain areas.
If there is more than one landmark icon under the
map cursor, you are prompted to select a place from
a list.
Limited coverage only
When you select a traffic incident icon, you can check
the traffic information for the selected location.
121