Table of Contents
Advertisement
14
Fig.16
(1) 54mm from top of countertop
(2) at least 60mm between the back side of the cut-out and the back of the countertop.
Installing the Separator Below the Base of
the Cooktop
It is recommended that a 30mm clearance be left
between to base of the cooktop and the separator.
The separator shall be heat resistant, made of low
thermal conductivity material and shall be remova-
ble with the use of a tool for installation and ser-
vice.
Clearance
Separator
Space for
connections
Fig.17
Advertisement
Table of Contents
