Randell 9828SCA Specifications

Drop-In Frost Top
model
9828SCA
Description:
Drop-in self-contained, mechanically cooled, frost top unit
with one piece stainless steel top, perimeter troughs and drain
opening. R-404a refrigerant, "CFC free". Wrapped refrigeration
construction with condensing unit, expansion valve, and
thermostatic control. Cordset for 115V operation.
Specifications:
UNIT EXTERIOR: Top to be 1 piece 18-gauge stainless steel with
a 2" overhang on all sides, perimeter trough, and drain opening.
Unit top is elevated above counter surface. Condensing unit
mounted on corrosion resistant framework, suspended below
unit body. Studs fitted to each corner for drawing unit down tight
against countertop. Stainless steel louver panel provided for field
installation in counter.
UNIT INTERIOR: Unit interior wrapped with refrigerating lines.
Refrigeration lines insulated with CFC free, foamed in place
polyurethane.
REFRIGERATION: CFC free, R-404a refrigeration system to be
wrapped refrigeration construction. Condensing unit, expansion
valve, and thermostatic control for operator adjustability mounted
on corrosion resistant framework, suspended below unit body. 8'
cordset (NEMA 5-15P) supplied for 115V.
Standard Features:
• Self-contained refrigeration system with thermostatic
control, system utilizes "CFC free", R-404a refrigerant
• All stainless steel top—one piece
• Foamed in place, "CFC free" urethane insulation
• Perimeter troughs, drain provided
• Stainless steel louver provided
• 9' corset for 115V plug-in operation
• .625" diameter drain welded in trough
• Custom sizes available
models 9800SCA
9843SCA 9857SCA
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
9872SCA
model 9843SCA shown
9886SCA
Randell Drop-In, Page 3
Revised 09/04