Table of Contents
Advertisement
Press End Time button to set the desired time
delay.
•
Press Start/Pause button. Time Delaying
starts countdown and the time delaying
symbol lights up on the display. The ":" in
the middle of the displayed delay time will
flash.
•
Additional laundry may be loaded /
taken out during the End Time period.
At the end of the End Time countdown
process, End Time symbol disappears,
drying process starts and the programme
duration is displayed.
C
NOTE
• If loading door is opened and closed during
the End Time duration, the programme will
switch to pause mode. End Time function
should be resumed with pressing Start/
Pause button.
Changing the End time
If you want to change the time during
countdown:
•
End Time is deactivated when the dryer
is switched off and on with On/Off/Cancel
button. Restart the dryer and repeat the
End Time procedure for the desired time.
•
When your dryer is operated for the
first time, it starts with the declaration
Dryer / User Manual
programme (wardrobe dryness for
cottons).
Canceling End time function
If you want to cancel the End Time countdown
and start the programme immediately:
•
End Time is deactivated when the dryer
is switched off and on with On/Off/Cancel
button.
•
Press Start/Pause button to start the
programme you have previously selected.
5.10 Warning symbols
C
NOTE
• Warning symbols may differ according to
the model of your machine.
Lint filter cleaning
When the programme is completed, a warning
symbol will appear continously indicating that
the filter needs to be cleaned.
C
NOTE
• For detailed information, see 6 Maintenance
and cleaning.
• If the filter cleaning symbol flashes
continuously, see 7 Troubleshooting.
Draining the water tank
When the programme is completed, a warning
symbol will appear continously to remind that
the water tank needs to be drained.
C
NOTE
• For detailed information, see 6 Maintenance
and cleaning.
If the water tank becomes full while the
programme is running, the warning symbol will
start to flash and the dryer will pause. Drain
the water in the water tank and press Start /
Pause button to resume the programme. The
warning symbol turns off and the programme
resumes operating.
17
Advertisement
Table of Contents
