4. Install the fan.
5. Install the
4-cell battery
6. Install the
base
cover.
7. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
4-cell battery
4. Remove the speakers.
5. Remove the
system
board.
NOTE:
The system board can be removed with the heat sink attached.
6. Remove the
display
assembly.
7. Remove the
power-adapter
About this task
The following image indicates the location of the power button and provides a visual representation of the removal procedure.
Steps
1. Remove the screw (M2x3) that secures the power-button board to the palm-rest and keyboard assembly.
2. Open the latch and disconnect the power-button cable from the system board.
3. Peel the power-button cable from the palm-rest and keyboard assembly.
4. Lift the power-button board along with its cable, off the palm-rest and keyboard assembly.
5. Remove the screw (M2x3) that secures the power button to the palm-rest and keyboard assembly.
6. Lift the power button off the palm-rest and keyboard assembly.
or the
3-cell
battery.
After working inside your
Before working inside your
or the
3-cell
battery.
port.
computer.
computer.
Removing and installing components
47