Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for 3nStar TCM010
Summary of Contents for 3nStar TCM010
- Page 1 15” Capacitive Touch Screen Monitor USER MANUAL TCM010...
-
Page 2: Table Of Contents
1.1 Safety Information ..................2 1.2 Electromagnetic Compatibility Statement: ............. 4 Chapter II: Installation Guide ............... 5 2.1 Appearance of TCM010 Touch Screen Monitor ..........5 2.2 The Rear Panel I/O Signs and Description ............ 6 Chapter III: Instructions for Installation ..........7 Touch Screen Driver Installation ............... -
Page 3: Chapter I: Overview
1.1 Safety Information • TCM010 is fully compliant with the relevant requirements of the national standard GB/4943-2001 IT equipment security. Make sure the electricity meets power requirements such as voltage and frequency •... - Page 4 TCM010 User Manual In accordance with the relevant explanation in national standards GB/T9813-2000 • microcomputers general specification, after the computer is below the temperature of 10°C of environment storage, please place the machine in room temperature (10-35°C) conditions for more than two hours to avoid damage from low temperature.
-
Page 5: Electromagnetic Compatibility Statement
TCM010 User Manual If the following occur: Liquid penetrated the body of the monitor • • Monitor accidental damage Monitor producing a burning smell • Monitor showing sudden abnormalities • Disconnect the power supply immediately. Then, unplug the power cord and contact a qualified service technician to fix the problem. -
Page 6: Chapter Ii: Installation Guide
TCM010 User Manual Chapter II: Installation Guide 2.1 Appearance of TCM010 Touch Screen Monitor... -
Page 7: The Rear Panel I/O Signs And Description
AUTO/EXIT: Press this button to apply the monitor setting automatically and Exit the OSD menu. TCM010 touch screen monitor is using the manual handle design which can be adjusted within the range of 0 degrees to 90 degrees to make the operation more humane. -
Page 8: Chapter Iii: Instructions For Installation
TCM010 User Manual Chapter III: Instructions for Installation 3.1 Touch Screen Driver Installation In Windows 7 (above) and Linux 2.6.30 (above), there is no need to install the driver for the touch screen. Windows XP or 2000 is not supported Multitouch. -
Page 9: Touch Screen Test
TCM010 User Manual Touch Screen Test Open the CD, install "ILITek c-tp utility.exe", and open "TP Tool". Click "Setting", select "Full Screen" in "Canvas Setting" and click "OK" to save and exit. Click "Drawing" to test. -
Page 10: Touch Screen Update
TCM010 User Manual 3.3 Touch Screen Update 1. Open the "ilitekusbupgradetools.exe" in the CD. 2. Click “Search” to find the Touch device and click “Select All” to select the device. 3. Click "load Hex" to load the firmware and click "Upgrade" to update the firmware. -
Page 11: Chapter Iv: Common Faults And Exclusion
TCM010 User Manual Chapter IV: Common Faults and Exclusion No display on the screen: 1. Power saving mode is on, so press any key on the keyboard or move the mouse to deactivation. 2. The pins of the VGA cable (HDMI/DVI)connector are bent or lost contact to the VGA (HDMI/DVI)interface, change the VGA (HDMI/DVI)cable. - Page 12 TCM010 User Manual Thank you very much for using 3nStar product.
Need help?
Do you have a question about the TCM010 and is the answer not in the manual?
Questions and answers