4. Press the < >< > buttons to choose [Add a Device], and then press the < > button.
NOTE
Once a computer is added, the computer name will be displayed on the screen in 4. To connect to a
computer again, simply choose the computer name from the list.
5. A list of detected access points will be displayed in the [Access Point Connect] screen.
Use the following method to connect with an access point.
5A. Connecting to WPS‐Compatible Access Points
5B. Connecting to Access Points in the List
5C. Connecting to an access point manually
NOTE
WPS makes it easy to complete settings when connecting devices over Wi‐Fi. You can use either
•
Push Button Configuration Method or PIN Method for settings on a WPS supported device. The
push button configuration method is used in the following explanation.
Refer to the user guide provided with your access point to check if it supports WPS.
•