Advertisement
5. MaiNtENaNCE
5.1.
PERiOdiC CHECKs aNd MaiNtENaNCE
For long service and accuracy, the following actions should be carried out at the recommended intervals:
WEEKlY - CHECK OPERatiON
The gauge should be checked weekly for correct operation. Look for smooth lever operation and fast, smooth gauge movements.
Check for leaks from tyre connector seals, and for chafing or wear of the flexible hoses. Any problems should be immediately rectified.
QuaRtERlY - CHECK CaliBRatiON
We recommend the accuracy of the gauge be checked against a calibrated 'master' gauge every 3 months, or at shorter intervals
depending on operator's own quality procedures.
5.2.
BattERY CHaNgE
5.2.1.
When display will not illuminate renew battery. Undo clip door, remove batteries and replace, observing polarity.
WEEE REgulatiONs
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BattERY REMOval
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
ENviRONMENt PROtECtiON
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson Way, suffolk Business Park, Bury st Edmunds, suffolk. iP32 7aR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
SA400 | Issue:1 07/11/19
Advertisement
