STAUFF OCS I-Displays Quick Start Manual

Oil Quality Display (OCS I-Displays)
QUICK START GUIDE
WHAT'S IN THE BOX
1. Configuration
Allow configuration cable
to update drivers.
NOTE: Cables are sold separately
2. Installation
OCS
3. Activation steps
Check installation
Power on
Wait for 1 minute
Check output
All manuals and user guides at all-guides.com
Quick Start
Guide
Configuration parameters:
►
Warning and alarm levels
►
Temperature units
►
Datalog interval
►
Rate of change interval
►
Bluetooth on/off
OCS I-DISPLAY
4. Troubleshooting
1. Check configuration (step 1)
2. Refer to manual
3. sales@stauff.com
Calibration
Certificate
DEFAULT CONFIGURATION
(Quality warning thresholds are configurable)
TDN Oil quality
1200 Sensor in air / No oil detected
1000 New
Good
Worn
500
Severely worn / Needs replacing
End of life
250
0
OCS I-Displays port for power and data
3
4 2
6
5 1
Alarm (HIGH)
Warning (HIGH)
Warning (LOW)
Alarm (LOW)
-
+
Oil Temperature
Oil quality
RS485B
RS485A