Summary of Contents for Schiller Little Wonder PRO VAC
Page 1
LITTLE WONDER PRO VAC MODEL: 5612-00-59 (S/N: 1140000000 and Above)
Page 2
CALIFORNIA PROPOSITION 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. ADVERTENCIA: Cáncer y Dãno Reproductivo - www.65Warnings.ca.gov. WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. ADVERTENCIA El estado de California hace saber que los gases de escape de este producto con-...
IMPORTANT MESSAGE On behalf of everyone at Little Wonder, we would like to thank you for your purchase of a Little Wonder Pro Vac. This professional vac was designed to the highest standards to ensure you many hours of uninterrupted service.
Schiller of hazard seriousness. These words appear in this Grounds Care, Inc. Engineering Department. Any manual and on the safety labels attached to Schiller Schiller Grounds Care, Inc. product that is altered, Grounds Care, Inc. machines. For your safety and...
Page 5
LITTLE SAFETY WONDER PRO VAC OPERATOR PREPARATION AND TRAINING SITE PREPARATION AND CIRCUMSTANCES READ THE OPERATION & SAFE- • Evaluate the terrain to determine how to safely TY MANUAL perform the job. Only use accessories and attachments approved by the manufacturer. •...
Page 6
LITTLE SAFETY WONDER PRO VAC OPERATING SAFELY INTERRUPTING OPERATION Before leaving the operator's position: IN GENERAL - Park on level ground. – Use extra care when loading or unloading the - Shut off the engine. machine into a trailer or truck. Stop the engine, and wait until the fan stops moving: –...
Page 7
LITTLE SAFETY WONDER PRO VAC MAINTENANCE SAFETY When refueling or checking fuel level: - Stop the engine and allow to cool; In general - Do not smoke; Maintain machine according to manufacturer's sched- - Refuel outdoors only; ule and instructions for maximum safety and best - Use a funnel;...
LABELS LITTLE WONDER PRO VAC SAFETY DECALS An important part of the safety system incorporated in this blower are the warning labels found on the blower. Replace labels if damaged or illegible. Read and understand the operator manual. Pay particular attention to all sections regard- ing safety.
Page 9
LABELS LITTLE WONDER PRO VAC SAFETY DECALS An important part of the safety system incorporated in this blower are the warning labels found on the blower. Replace labels if damaged or illegible. STOP 4165567 Thrown Object / Flying Debris Hazard -Do not operate without properly attached bag.
LITTLE CONTROLS WONDER PRO VAC THROTTLE (A) Controls engine speed and the amount of air being blown. Stops the engine when moved to the extreme slow position. CHOKE (B) Move to the “CHOKE” position to apply the choke. Move to the “RUN” position to remove the choke. FUEL SHUT OFF (C) Move to the “OFF”...
•Feed the tail end of the band (on the clasp side) behind the bracket in the sleeve. The Little Wonder Pro Vac includes a convenient lifting •Pinch the wire form on the clasp together and lug A on top of the fan housing that can be used to lift connect it through 2 holes in the adjustment bracket the unit.
Page 12
LITTLE SET-UP INSTRUCTIONS WONDER PRO VAC LIFTING LUG The Little Wonder HPV Vac includes a convenient lifting lug A on top of the fan housing that can be used to lift the unit. This lug can only hold up to a total of 250 lbs (115 kg).
LITTLE OPERATION WONDER PRO VAC PRE-OPERATION CHECK LIST BEFORE STARTING THE ENGINE OWNER’S RESPONSIBILITY • Read the operator manual and engine manual. • Be familiar with all controls, how each functions and • Review and follow all safety rules and safety decal what each operates.
Page 14
LITTLE OPERATION WONDER PRO VAC VACUUMING REMOVING BLOCKAGES / CLOGS 1. Adjust nozzle to select height by turning the nozzle 1. Turn off the engine by moving the throttle to the control knob and secure position with wing nut. “SLOW” position. Turn the engine switch to the “OFF” position.
ENGINE When replacement parts are required, use genuine See engine manual for air cleaner service intervals and Schiller Grounds Care, Inc. parts or parts with servicing procedure. equivalent characteristics, including type, strength and material. Failure to do so may result in product Keep the engine’s cooling air intake clear of debris for...
LITTLE FAN REMOVAL AND INSTALLATION WONDER PRO VAC Before performing any type of maintenance on the 8. Slide spacer 2 onto new bolt 1 in orientation shown machine, stop engine, wait for all parts to stop mov- under illustrated parts list on next page. ing and disconnect spark plug.
Page 17
LITTLE FAN REMOVAL AND INSTALLATION WONDER PRO VAC Kit Number for Item Part No. Description Part 64123-127 BLT-HEX3/8-24 X 1-3/4 GR 8 4176328 910527 WASHER-FANP 4176328 600114 FAN ASSY LV 6 HP 4176328 64164-13 KEY-1/4" SQ X 2" LG 4176328...
LITTLE STORAGE WONDER PRO VAC STORAGE To prevent possible explosion or ignition of vaporized fuel, do not store equipment with fuel in tank or carburetor in an enclosure with open flame (for example, a furnace or water heater pilot). DAILY STORAGE 1.
LITTLE TROUBLESHOOTING WONDER PRO VAC TROUBLESHOOTING COMMON PROBLEMS COMMON CAUSES ENGINE WILL NOT START. • Refer to the section “Operation” in this manual to verify engine starting procedure. (Check the Engine Manual for more • Check the spark plug connection. details.) •...
EC Declaration of Conformity 4171087 REV A The Undersigned Manufacturer: Schiller Grounds Care, Inc. Kurt Knudsen 1028 Street Rd. Director of Operations Southampton, PA 18966 Date: 30th July 2014 EU Authorized Representative: Earlsmere Limited Unit 18 Valley Road Jim White...
LITTLE PARTS ASSEMBLY WONDER FIGURE 1 PRO VAC ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 4166004 ENGINE-6.5 HP VANGUARD 1 35 910527 WASHER-FAN 600180.17 DECK-HPV, 6 HP 36 64163--46 WASHER-3/8 ID X 3/16 TH 600184.17 HANDLE MOUNT 37 64163-31 WASHER-3/8 4171304 S-HOUSING VAC CE...
LITTLE LINER ASSEMBLY WONDER FIGURE 3 PRO VAC ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 4171304 S-HOUSING ASSY CE 600175 LINER 720592 BOLT-5/16-18 X 1 64163-29 WASHER-25/64 X 1 X 12GA 8 64229-02 LOCKNUT-5/16-18...
Page 28
NOZZLE ASSEMBLY LITTLE WONDER FIGURE 4 PRO VAC...
NOZZLE ASSEMBLY LITTLE WONDER FIGURE 4 PRO VAC ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 600100 NOZZLE 600133.7 ASSY-NOZZLE CLMP PLATE 1 600183.17 BRKT-NOZZLE VER. 2" 64141-6 NUT-FL 5/16-18...
Page 30
Schiller Grounds Care’s responsibility under this limited warranty is restricted to repairing or replacing, at its purchaser only, and under the following terms and conditions. Schiller Grounds Care’s responsibility option, any covered part found to be defective in material or workmanship during the warranty period.
Page 31
The authorized dealer makes no warranty of its own and such dealer has no authority to make any representation, warranty, or promise on behalf of Schiller Grounds Care or to modify the terms or limitations of this limited warranty in any way.
Need help?
Do you have a question about the Little Wonder PRO VAC and is the answer not in the manual?
Questions and answers