SAFETY INSTRUCTIONS AND WARNINGS…………………. P.03 PLACEMENT AND INSTALLATION………………………………P.04 AMBIENT TEMPERATURE AND AIR EXCHANGE…………… P.04 WATER CONNECTIONS…………………………………………...P.05 CONNECTING TO THE CO2 CYLINDER……………………………………………………………... P.06 DESCRIPTION AND OPERATION………………………………….. P.07 TFT and FUNCTIONS………………………………………..……….. P.09 EMPTY THE MACHINE………………………………………………..P.09 WATER DISPENSING and ICE PRODUCTION………….………………………………………….. .P.10 OPERATING ANOMALIES……………………………………………………………………………….P 10 DISPOSAL OF APPLIANCES…………………………………………P.11...
Page 3
The manufacturer declines any responsibility towards persons or objects, as well as for the proper operation of the machine, due to failure to follow the instructions given. This machine complies with the safety regulations currently in • The machine can also be flush-mounted in a wall unit (special farce.
IMPORTANT NOTE The installation of the appliance must be carried out exclusively by qualified personnel in compliance with the regulations in farce. Considering the heavy weight of the machine, it is essential that the furniture unit be suitably secured to the wall. Check to make sure that the opening for housing the machine has the correct dimensions (Fig.1).
IMPORTANT Fig.3 The machine must only be installed by qualified personnel. Due to the weight of the machine, it is recommended that two people carry out this operation. 1) Position the appliance inside the niche with the right and left sides in contact with the side panels and the sliding guides fully extended...
CONNECTION TO THE CO2 CYLINDER [for IMK00002 series models] Turn the knob counterclockwise to the end (pressure gauge closed); - screw the pressure gauge onto the cylinder all the way down and quickly so as to avoid slight gas leaks; - connect the hose (from the machine to the pressure gauge connection);...
DESCRIPTION AND OPERATION The machine is set up for domestic use and is designed to produce ice cubes and dispense still and sparkling water. Other types of use are not intended and could be dangerous. The manufacturer cannot be held responsible for damage caused by failure to observe the safety instructions and warnings.
Page 8
The machine is intended for domestic use. The machine supplies ice cubes and glasses of natural and light sparkling water. Other usage is not allowed and may result dangerous. The manufacturer declines any responsibility coming from misuse. FRONT VIEW 01. Ice drawer 02.
The manufacturer declines all responsibility for damage caused by improper use, incorrect use and non- compliance with the instruction booklet and the information set out below. After inserting the power cable, wait at least two hours to allow the oil to flow back into the compressor.
OPERATING ANOMALIES After dispensing sparkling water a few drops of water could come out of the dispenser, this is due to the presence of Co2 in the pipes, it is sufficient to let more water flow to stop the bubbles. If the water is not sparkling enough: - check that there are at least 4-5 atm on the pressure gauge;...
Page 11
European Directive 2002/96/CE on electrical waste and electronic equipment (WEEE) requires that electrical appliances not be disposed of as unsorted municipal waste. Used appliances must be collected separately to optimize the reclamation or recycling of the component materials and prevent potential harm to human health and to the environment.The symbol ofthe cancelled garbage bin is displayed on ali these products to remind users ofthe obligation of separate collection.
Page 12
We remind you that the appliance you have chosen is entirely made in Italy with an artisanal production. Thank you for becoming our customers and for trusting us. ________________________________________________________________________________ Ricordiamo che l'apparecchio che avete scelto è interamente realizzato in Italia con una produzione artigianale.
Need help?
Do you have a question about the IMK00001TFT Series and is the answer not in the manual?
Questions and answers