Mitsubishi Electric Mr.SLIM PLA-SM71EA Service Manual page 44

OPERATING PROCEDURE
9. Removing the panel
(1) Remove the electrical box fixing cover. (See Photo 1)
(2) Disconnect the connector for vane motor (CNV: White).
(Refer to procedure 5)
(3) Loosen the 4 corner panel fixing screws (tapping screw
4×16). (See Figure 4)
(4) Slide the corner panel to the direction of the arrow 1,
and remove the corner panel. (See Figure 4)
(5) Remove the 4 installation screws (M5×28). (See Photo
10)
(6) Release the 2 temporary hanging hooks to remove the
grille. (See Photo 11)
10. Removing the drain pan
(1) Remove the electrical box. (See photo 3 and refer to
procedure 6)
(2) Remove the bell mouth (tapping screw 4×10 : 2 screws).
(See Photo 5)
(3) Remove the drain pan (screw M5×10: 4 screws).
OCH683
PHOTOS & ILLUSTRATIONS
Figure 4
Corner panel
Corner panel
Photo 10
Temporary hanging hook
Photo 11
Photo 12
Drain pan
fixing screws
44
Screw
①
Close-up
Grille
①
Installation
screw
Drain pan
Drain pan
fixing screws