1. Manuals
  2. Brands
  3. POWERSHADES Manuals
  4. Window Blinds
  5. SQUARE CASSETTE
  6. Installation manual

POWERSHADES SQUARE CASSETTE Installation Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

SQUARE CASSETTE INSTALLATION GUIDE
Thank you for your purchase! This will guide you through the Square Cassette installation process.
If you ever need any help throughout, reach out to us at (417) 553-0504.
Before installing the Square Cassette roller shade, Please have measurements from your
!
order handy. Your shade will come labeled with the room name and shade name on the
outside of the box to help you correctly identify the shade.

REQUIRED TOOLS AND HARDWARE

!
Shade > 60"W = 3 Brackets. Shade > 90"W = 4 Brackets. Shade > 120"W = 5 Brackets.

INSTALLATION

STEP 1

Determine the correct window for the shade to be installed and whether the shade was ordered
to be inside or outside mounted. Please also consider the control side of the shade. You can
reference the packaging of the shade or you can refer to your order on the PowerShades Portal for
this information.
1
SCREWS
WALL SPACERS
STABILIZERS
BRACKETS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SQUARE CASSETTE and is the answer not in the manual?

Questions and answers

Related Manuals for POWERSHADES SQUARE CASSETTE

Summary of Contents for POWERSHADES SQUARE CASSETTE

  • Page 1 Determine the correct window for the shade to be installed and whether the shade was ordered to be inside or outside mounted. Please also consider the control side of the shade. You can reference the packaging of the shade or you can refer to your order on the PowerShades Portal for this information.
  • Page 2 STEP 2 Before mounting your brackets, place the wall spacer on the back of the brackets, lining up the screw holes. You will be able to snap the spacer to the back of the bracket. Depending on mount type, the spacer will be screwed to the surface through the bracket (outside mount) or will simply be attached (inside mount).
  • Page 3 STEP 4 Apply bracket stabilizer to the backof your bracket when its screwed and mounted. You will be able to slide it in-between the spacer and the back of bracket until it clicks into place. STEP 5 Attach the cassette to the mounting brackets. Rest the groove on the top of the cassette to the top lip of the bracket.

Table of Contents