Summary of Contents for Drop BMR1
- Page 1 Drop BMR1 Nearfield Monitors Quick Start Guide 1. Install stand to the speaker using included accessory pack. Vertical Orientation Horizontal Orientation Page 1 of 5 Quick Start Guide v1.3...
- Page 2 2. Connect the passive speaker to the active speaker using speaker cable provided. 3. Plug in the power supply into the active speaker first, then connect the power supply to 100~240 V source. Page 2 of 5 Quick Start Guide v1.3...
- Page 3 4. Connect to audio source and play: Analog in – Via 3.5 mm jack interconnect cable. b. Digital in – Bluetooth 5. Button Function Default Mode – Analog In. Indicated by a solid white light, this is the first mode when the device is powered on.
- Page 4 Bluetooth. It is also possible to use a gaming headset with mic support when the BMR1 is connect with the supplied TRRS cable plugged into a compatible device such as a laptop. d. Master Reset – Long press for 12 seconds to activate master reset in any mode. The light will turn off for a short period and light up again signaling a successful reset.
- Page 5 Page 5 of 5 Quick Start Guide v1.3...
Need help?
Do you have a question about the BMR1 and is the answer not in the manual?
Questions and answers