Table of Contents
Advertisement
Quick Links
MIST PROCESSOR
SPA MIST II
Model AK-160
O p e r a t i n g I n s t r u c t i o n s
Thank you for purchasing our product.Please
read through this manual and this note
carefully before installing or using.These
instructions provide important information for
correct usage of the product to avoid personal
injuries or property damages against you or
your clients.
This product is intended for the exclusive use
in hair salon or esthetic salon for their
treatment and service,and must be operated or
handled by the qualified/professional
hairdressers or by their staff under the
supervision of hairdressers.
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS..................
GROUNDING INSTRUCTIONS ........................
Name of Each Part...........................
Location of Warning Label...............
Accessories/Optional Items ............
Control Panel.................................
Description of Keys........................
Default Setting of Modes ...............
Preparation .................................
Operation Procedures.....................
Using the Open Mist Ball Nozzle............
State Indication...........................
Before Asking for Repairs ............
Disposing of the Product...............
Guidance on Daily Inspection.........
Main Specifications .....................
5th Version
July 2023
1
5
6
6
7
9
9
11
11
12
14
19
26
27
29
30
31
32
32
33
34
Request No. 1A0SQFA0
Advertisement
Table of Contents
Related Manuals for Takara Belmont SPA MIST II
Summary of Contents for Takara Belmont SPA MIST II
-
Page 1: Table Of Contents
MIST PROCESSOR Table of Contents SPA MIST II IMPORTANT SAFETY INSTRUCTIONS……………… GROUNDING INSTRUCTIONS …………………… Model AK-160 Name of Each Part……………………… O p e r a t i n g I n s t r u c t i o n s Location of Warning Label……………... -
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following: Before Using the Product Carefully read the "Safety Precautions" and use the product correctly. For safe use of the product, be sure to perform the daily inspection following the procedures described in Guidance on Daily Inspection (page 33). - Page 3 IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of burns, electrocution, fire, or injury to persons: Do not insert a hand or foreign matter into Do not climb onto or lean against the machine the water-supply bottle. or the stand. The inside of the machine is hot.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS WARNING Close supervision is necessary. Handling of Power Cord. Close supervision is necessary when Keep the cord away from heated surfaces. the appliance is used by, on, or near children or invalids. Connect this appliance to a properly Do not use attachments not recommended by the grounded outlet only.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS CAUTION Handling of Power Cord Do not put hot water into the water-supply bottle. Do not put hot water into the water-supply When disconnecting the power plug, do not bottle. When you do this, burns, machine hold it at the cord, but pull it out while errors, or machine failure may result.
-
Page 6: Grounding Instructions
GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short-circuit, grounding reduces the risk of electric shock by providing a path of low resistance for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in compliance with all local codes and ordinances. -
Page 7: Name Of Each Part
Name of Each Part Standalone Type Back Side of Main Unit Front Side of Main unit Detachable tray Control panel Exhaust nozzle Hose main body holder Water-supply bottle pan Water-supply bottle Power switch State indication lamp Drain tank Handle Inlet Drain cock Power plug Power cord... -
Page 8: Accessories/Optional Items
A cc essories Check that all of the following accessories are provided. Cap Joint N Flexible Hose Open Mist Ball Nozzle Sucking disk (spare disk: 1 piece) Inside Outside Joint hose (spare hose: 1 piece) Joint packing 1 piece 2 pairs 1 pair (spare packing: 2) Drain Tank... - Page 9 Opt i o n s (Standard accesories in some countries) For purchasing the options, contact the nearest dealers or our company directly. (See page 35 "Information.") Mist Cap Aromatherapy Diffuser Holder practice. Aromatherapy diffuser pad 1 piece 1 piece 1 piece 1 pair 2 pieces (containing 5 sheets)
-
Page 11: Description Of Keys
Description of Keys Mode Selection Key and Lamp (The lamp illuminates when the key is turned on.) Open Mist Color Spa Menu. Lamp Lamp Scalp Care Perm classified as a cosmetic. Lamp Lamp Hair Care Hand Care the cosmetic for hand care is applied Lamp Lamp Information... -
Page 12: Default Setting Of Modes
Default Setting of Modes Default Setting Mode Mist 60 minutes 8 minutes 10 minutes Perm or burns. Mode Only Set the modes to the desired conditions by referring to the table shown above. chosen for two seconds or longer. has been saved. -
Page 13: Preparation
The mist cap (consumable item) is an option. For purchasing the cap, contact the nearest dealer or our company directly. See page 35 "Information." List of Mist Caps for SPA MIST II Type Product Code... - Page 14 Preparation Pour water into the water-supply bottle. Remove the water-supply cap and pour water. that comes with the product or the purified water use the dedicated water-supply bottle and the water-supply cap. and mineral water other than the distilled water or the purified water dedicated for the operation, or failure may result.
-
Page 15: Operation Procedures
Operation Procedures(... - Page 17 O pe ra ti on Procedures Press the Start/Stop key to start the operation. When preheating is completed and the machine is in the operation standby state, press the Start/Stop key to start operation. During operation, the state indication lamp will illuminate. During Operation During operation, the lamp for the Start/Stop key, the state indication lamp, and the lamp that indicates the selected mode will illuminate, and the remaining time will be indicated.
- Page 18 Op era ti on Procedures Cooling (Only for the hair care mode and the color mode) When the preset time has elapsed, an electronic alarm sound (two blips) is initiated, and the machine enters the cooling process. (In modes other than the hair care and color modes, no cooling operation is provided, and the machine is put in the time-up state.) When the cooling operation is completed, an electronic alarm sound (three blips with a longer third sound) is initiated, and the machine is put in the time-up state.
- Page 19 O p e r a t i o n P r oc ed ur es Drain the inside water when closing the work. Put a washbowl or the like beneath the drain outlet, and open the drain cock to drain the water. Upon completion of draining, close the drain cock.
-
Page 20: Installing/Detaching The Mist Cap (Option)
Installing/Detaching the Mist cap Practice using the shampoo bowl on page 26. Use either of the following: The mist cap for YUME and open mist ball nozzle (EA-CMC-YB); or The mist cap for rear shampoo and YUME (EA-SMC-RSW), according to the bowl you use. Installing the mist cap Lift the head of the customer, and overlap While pulling the turban at both ends, attach... - Page 21 Insert the leading edge of the flexible hose into the cap joint N. At this time, be careful not to twist the mist cap, and insert the flexible hose with the [UP] mark of the inner cap joint N facing UP. (See the section "Preparation"...
- Page 22 Installing/Detaching the Mist Cap for the styling chair and perm/color. Installing the mist cap. Apply the turban by using either method of A or B shown below. Method for fixing the hook and loop Method for fixing the hook and loop fasteners on the forehead fastener at the neckline.
- Page 23 This completes the installation of the mist cap. At this time, insert the flexible hose with the [UP] mark on the inner cap joint N facing [UP], while paying attention not to twist the mist cap. (See the section "Preparation" on page 12.) Flexible hose holder (option) Detaching the Mist Cap Release the stopper, and loosen the...
- Page 24 Installing/Detaching the Mist Cap Practice using CALME, men's chair Use the mist cap for CALME, men's chair (EA-SMC-CA). Installing the mist cap At this time, adjust the pillow position to allow Recline the backrest of CALME for an adequate a gap of about 5 cm (thickness of two palms) angle.
- Page 25 Adjust and secure the right and the left Pull the string tight and fix the stopper. fasteners, one at a time. Fastener Stopper Information To prevent mist leakage, be sure to pull the hair in the fastener. CAUTION string tight. Insert the leading edge of the flexible hose into the cap joint N.
- Page 26 Detaching the Mist Cap Release the stopper, and loosen the string. Detach the hook and loop fasteners, and then remove the mist cap. Stopper Information Pay attention to dripping when removing the mist cap, since water drops are accumulated in the mist cap. Detach the mist cap from the flexible hose after Detach the turban.
-
Page 27: Using The Open Mist Ball Nozzle
Using the Open Mist Ball Nozzle Install the Open mist ball nozzle on the bowl by using the suction pad. Information Wipe and clean the position in advance to which the Open mist ball nozzle is installed to remove wetting, etc. -
Page 28: Using The Aromatherapy Diffuser Holder (Option)
Using the Aromatherapy Diffuser Holder (Option) Use the holder under the open mist mode. Preparation Detach the lid of the Aromatherapy Insert the Aromatherapy diffuser pad into the lid. Diffuser Holder. Aromatherapy diffuser pad Apply several drops of aromatherapy oil on Close the lid tightly. - Page 29 How to attach/detach the Flexible Hose Holder (Option) If you attach/detach the Flexible Hose Holder with the Flexible Hose already installed to the main unit, the mouth ring of the Flexible Hose Holder will get extra pressure and will stretch CAUTION out and will not be able to firmly hold the Flexible Hose.
-
Page 30: User Maintenance Instructions
USER MAINTENANCE INSTRUCTIONS The plastic, plated, or painted parts should be Before fixing the machine, be sure to disconnect cleaned with a dry soft cloth the power plug from the wall outlet. Soft cloth Power plug The control panel or the metallic parts may When tough stains or oil content adhere, wipe become inoperable or rust when exposed to water. -
Page 31: State Indication
State Indication When an indication showing the state of the main machine unit is displayed on the display panel, take necessary measures according to the table stated below: Wait until the machine is warmed up. Indicate preheating is in process. Indicate cooling is in progress Indicate the remaining time of cooling phase. -
Page 32: Before Asking For Repairs
Be f o r e A s k i n g f or R ep ai rs When the problem cannot be rectified even if an inspection is made according to the table shown below, immediately stop using the machine, turn off the power switch, disconnect the power plug, and immediately contact the nearest dealer or our company directly. -
Page 33: Disposing Of The Product
Di s p o s i n g o f th e Pr od uc t Co ns um a b l e S u p p l ie s ( I n c l u d i n g Op t i o n s ) The term "consumable supplies"... - Page 36 TAKARA BELMONT CORPORATION 1-1, 2-Chome, Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL : (06) 6213-5945 FAX : (06) 6212-3680 Printed in Japan...