Remington H-9000 - 20 Heated-Cliprollers Manual

Also See for H-9000:

Use and care manual (2 pages)

Table of Contents

Contents

1 Product Features
2 How to Use
3 Operating and Maintenance
- 3.1 Operating Instructions
- 3.2 Maintenance Instructions
4 Documents / Resources
- 4.1 References
- 4.2 Download manual

Remington H-9000 - 20 Heated-Cliprollers Manual

Product Features

Remington^® Heated Clip Hair Setter

20 velvety soft rollers with heated clips
Dual Heating Technology

Heated Clips allow heat to penetrate the hair from the outside as well as from the roller on the inside. Maximum heat transfer onto the hair sets the curls faster and holds them longer; creating curls in 5 minutes versus 20 minutes with ordinary setters.

Product Features

Heated Clip
20 clips and rollers in two sizes (8 med and 12 large)
On-indicator Light

How to Use

Remington® Heated Clip Setter

Close lid and plug in unit.
Roller will be ready in 90 seconds.
For a soft, wavy curl, use the rollers for only a couple of minutes. For a tighter curl, leave the rollers in the hair for 5-10 minutes.

Get Ready

Before setting, hair should be dry or only slightly damp, but never wet. Section hair and comb it smooth. Roll hair as usual in the direction of desired style. To secure each roller, place the clip crosswise over the rollers.

Get Set

Continue until your entire head is set. The time the rollers are left in the hair affects the tightness of the curl. The shorter the time, the softer the curl. Rollers will remain actively curling for approximately 15 minutes.

Go!

To release secured roller, remove each clip and roller gently. Unwind, never pull. Place roller back on correct post. Let each new curl spring back into position and cool for a moment. Then brush out hair and style. Spritz hair for extra hold.

Roller Placement:
To maximize roller temperatures, place the larger rollers on the front three rails and the medium rollers on the back two rails.

Operating and Maintenance

Operating Instructions

These heated rollers are designed to work on ordinary household current only (120 volts, 60 cycles AC). They are not intended for commercial use.
Plug cord into outlet, leaving lid closed. When unit is heated, follow "How To Use" section. Unplug unit after use.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Never try to defeat this safety feature.
Do not attempt to disassemble or modify this appliance.

BE ADVISED THAT THE END RINGS OF THE ROLLERS AND THE CLIPS MAY BE WARMER THAN OTHER ROLLERS, DUE TO THE UNIQUE DUAL HEATING TECHNOLOGY.

DO NOT TOUCH THE METAL RAILS THAT HEAT THE ROLLERS. THE RAILS BECOME VERY HOT WHEN HEATING. DO NOT TOUCH THE INSIDE OF THE CLIPS, AS THEY ALSO BECOME HOT WHEN HEATING.

TO AVOID DAMAGE, ROLLERS MUST BE RETURNED TO METAL RAILS WHEN NOT IN USE.

Maintenance Instructions

Clean unit with damp cloth only. No other maintenance is required.
Rollers may be cleaned with a damp cloth and mild detergent or soap.
Store appliance and cord where they will not be damaged.
Do not wrap the cord around the hairsetter.
Do not attempt to repair the appliance yourself; return it to Remington Consumer Service.

warning Note: To order accessories, please call 1-800-392-6544 or visit www.RemingtonProducts.com