Page 1
KK1688 Horizontal Diaper Changing Station Installation Instructions WARNING • Failure to follow these warnings and the installation instructions could result in serious injury or death. • Read all instructions before installing diaper changing station. Keep these instructions. DO NOT discard.
Page 2
ASSEMBLY INSTRUCTIONS ADUL T INSTALLA TION REQUIRED. TOOLS REQUIRED: Level(A) Measuring tape(B) Power drill with 7/32” , 1/8” and 1/2” masonry bits(C) Power screwdriver with bull nose phillips bit(D) • READ ALL INSTRUCTIONS BEFORE ASSEMBL Y OF DIAPER CHANGING STATION. •...
Page 3
WARNING • A stud MUST be located and used for at least one side of the diaper changing station. The diaper changing station is no stronger than the anchors or walls to which they are attached and, therefore, • MUST be firmly secured in order to support the weight they are intended to support.Contact an architect or building contractor if any questions.
Page 4
RECOMMENDED BLOCKING: If the walls do not have studs on center, then additional blocking is necessary (Fig.e). (10 1/4'') 260mm Contact an architect or building contractor to make sure the blocking is adequate and complies with building codes. For A.D.A. Compliance 43 1/4 OPERATION:...