Advertisement
Available languages
Available languages
C
INFORMATION
• The door will be locked if the Remote
Control function is selected. To open the
door, you need to press the Remote Control
key or change the programme position to
deactivate the Remote Control function.
Opening the loading door in case of power
failure:
C
INFORMATION
• In case of a power failure, you can use the
loading door emergency handle under the
pump filter lid to manually open the loading
door.
A
WARNING!
• Before opening the loading door, make sure
that there is no water in the machine to
avoid flooding. Water may be hot and could
cause scalding.
• Turn off and unplug the appliance.
• Open the pump filter lid.
31 / EN
• Remove the loading door emergency
handle behind the filter cover with a tool.
• Open the loading door by pulling the loading
door emergency handle downwards.
• Try to pull the handle downwards again
if the loading door is not opened.
• Bring the loading door emergency
handle to its original position after
opening the loading door.
5.17 Changing the selections
after programme has started
5.17.1 Adding laundry after the
programme has started
When you press the Start/Pause button, the
"Loading door locked" light on the panel will go
off if the water level in the machine is suitable.
If the water level in the machine is not suitable
when you press the Start/Pause button, the
panel will warn you that the door is closed.
5.17.2 Switching the
machine to pause mode
Press the Start/Pause button to switch the
machine to pause mode.
:
Washer-Dryer / User Manual
Advertisement
