Remove The Base Assembly For Vesa Mounting - Philips 243S7EJMB/69 User Manual

2. Setting up the monitor
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Extend the monitor base to its
maximum height.
2. Place the monitor face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
3. Loosen the assembly screws, then
detach the neck from the monitor.
2
1
Note
This monitor accepts a 100mm x
100mm
VESA-Compliant mounting interface.
VESA Mounting Screw M4. Always
contact manufacturer for wall-mount
installation.
100mm
10
100mm